General Tools 807
Ratcheting Offset Screwdriver with 2 Slotted Blades
The General Tools 807 Ratcheting Offset Screwdriver with 2 Slotted Blades is ideal for use where screws are concealed or obstructed, when leverage is required, or where turning space is limited. The drive rotation can be reversed instantly and the blades are constructed out of machined, ground, and hardened tool steel. This screwdriver meets the U.S. Government specification GGG-S-1408.
- Blade Types/Sizes: 1/4 in. and 3/8 in. slotted
- Drive Length: 4 in.
- For hard-to-reach screws, use the 807 ratchet offset screwdriver, especially where leverage is required. The ratchet drive reverses instantly for clockwise or counterclockwise rotation. The blades are made of machined, ground and hardened tool steel. Recessed head screws have a hex shaped recess. A hex wrench is used to remove or tighten this type of screw.
- For reaching hard-to-get-at screws, especially where leverage is required.
- Blades are made of machined, ground and hardened tool steel.
- Ratchet reverses for clockwise or counterclockwise rotation.
- Conforms to government specification GGG-S-1408.
- Tips: 1/4" and 3/8" straight blades
- Length: 4" (102mm)
- Width: 5/8" (16mm)
For hard-to-reach screws, use the General Tools 807 Ratchet Offset Screwdriver, especially where leverage is required. The ratchet drive reverses instantly for clockwise or counterclockwise rotation. The blades are made of machined ground and hardened tool steel. Recessed head screws have a hex shaped recess. A hex wrench is used to remove or tighten this type of screw.
Brand | General Tools |
---|---|
Condition | NEW |
UPC | 038728426642 |
Vendor Alias | 807 |
- 1 - Ratchet screwdriver
- 2 - Slotted Bits