General Tools 840
EZ-Pro Pro-Doweling Kit
The General Tools 840 E-Z Pro Doweling Kit works to create professional edge-to-edge, right-angle, and edge-to-surface joints which can be press-fit or glued via assuring the alignment of dowel holes and pins. The steel stops help adjust the depth of the cut.
- Supported Dowel Diameters: 1/4 in., 5/16 in., 3/8 in.
- Dowel/Tenon Center Setting Range: 3/16 in. I.D. to 1/2 in. O.D.
- Supported Drill Bit Sizes: 3/16 in., 1/4 in., 5/16 in., 3/8 in., 7/16 in., 1/2 in.
- Different drilling positions for 1/4 in., 5/16 in. and 3/8 in. stock
- Steel stops adjust the depth of the cut
- Revolving sintered turret accommodates six drill bit sizes
The General Tools 840 EZ Pro Pro-Doweling Kit. General 840 EZ Pro Pro-Doweling Kit is a simple tool for making fast, accurate dowel holes in furniture and other carpentry projects. Just slide the jig over the wood surface and use the revolving turret to drill precise dowel holes. The Jig accepts 6 bit sizes and will fit boards up to 4 thick. In addition, this professional kit includes three brad point drill bits, as well as dowel pins and centers, drill stops, a hex wrench and carpenters glue. Steel stops allow you to vary the depth of the cut. Perfect for joints that will be press fit or glued.
Brand | General Tools |
---|---|
Condition | NEW |
- 1 - Dowel Jig
- 3 - Brad Point Drill Bits (1/4", 5/16", 3/8")
- 1 - Dowel and Tenon Centers Set from 3/16" ID to 1/2" OD
- 3 - Drill Stops (1/4", 5/16", 3/8")
- 30 - Dowell Pins, 10 each 1/4", 5/16", 3/8"
- 1 - Wood Glue
- 1 - User's manual