Greenlee DM-830A-C
True-RMS 10,000-Count AC/DC Digital Multimeter with Calibration, 1000V, 10A, Dual Temperature, Conductance, Resistance, Capacitance, Frequency
Greenlee DM-830A-C
True-RMS 10,000-Count AC/DC Digital Multimeter with Calibration, 1000V, 10A, Dual Temperature, Conductance, Resistance, Capacitance, Frequency
The Greenlee DM-830A-C (52047814) TRMS 10,000-Count AC/DC Digital Multimeter with Calibration has AutoCHECK, NCV EF detection, ghost voltage elimination and a high resolution display. It measures AC/DC voltage, current, frequency, resistance, temperature, conductance, capacitance and duty cycle of logic level signals. It checks diodes and verifies continuity with a crest function, T1-T2 function and dBm functions.
- Includes certificate of calibration
- 1000V, 10A
- Supplied with certificate of calibration
- Measures voltage, current, conductance, resistance, capacitance and frequency
- AC+DC True-RMS gives accurate readings on complex waveforms
- Two temperature measurement using type K thermocouple
- Tests continuity and diodes
- AutoCheck mode automatically selects AC volts, DC volts, resistance or continuity
- Low input impedance masks "ghost" voltage pickup
- dBm function with 20 selectable reference impedance values
- Crest function captures voltage or current signal peaks
- Records max, min, max-min and average readings
- Two voltage detection modes: non-contact or using a single test lead
- Backlit LCD with 10,000 count dual display
- BeepJack feature warns when test leads are incorrectly inserted in current measurement terminals
- Automatic and manual range selection
- Relative offset mode for viewing changes in measurements
- Data hold to capture measurements
- Compatible with software interface DMSC-9U (sold separately) for direct-to-PC logging
Specifications:
- Voltage Measurement: 60mV, 600mV; 9.999V, 99.99V, 999.9V
- Amperage Measurement: 600μA, 6000μA; 60mA, 600mA; 6A, 10A
- Resistance: 600Ω; 6kΩ, 60kΩ, 600kΩ; 6MΩ, 60MΩ
- Capacitance: 60nF, 600nF; 6μF, 60μF, 600μF; 6mF, 25mF
- Frequency: 15Hz - 50kHz sine wave; 5.0 - 1.000MHz logic level square wave
- Measurement Category: CAT IV, 1000V
The Greenlee DM-830A-C (52047814) TRMS 10,000-Count AC/DC Digital Multimeter with Calibration, 1000V, 10A, is packed with functions you can rely on to get the job done, such as AutoCHECK, NCV EF detection, ghost voltage elimination, audible and visible alerts, and a high resolution display. The hand-held testing device is equipped with the following measurement capabilities: AC and DC voltage, AC and DC current, frequency, resistance, temperature, conductance, capacitance, and duty cycle of logic level signals. It also checks diodes and verifies continuity. The meter features true RMS AC measurements, a relative zero mode, data hold mode, and an intelligent automatic power off.
The DM-830A multimeter also features a crest function, which captures voltage or current signal peaks; and a recording function, which stores the maximum, minimum, and difference (maximum-minimum) input readings. The DM-830A record function can also calculate the average reading. The multimeter also has non-contact and single-probe voltage detection.
The DM-830A multimeter has an AutoCheck function for automatic selection of AC voltage, DC voltage, and resistance with low input impedance to mask "ghost" voltages. The multimeter features a T1-T2 function, which can measure and display two temperatures and calculate the difference. It also features AC + DC true RMS measurement capability. The DM-830A has a dBm function with selectable reference impedances.
The DM-830A multimeter includes a durable carrying case for meter storage and protection. An optional optically isolated computer interface with software (sold separately) facilitates the recording of readings from the meter to a computer, allowing for the tracking, organizing and storing of jobsite data.
Country of Origin | Taiwan, Province of China |
---|---|
Brand | Greenlee |
Catalog | 52047814 |
Condition | NEW |
UPC | 783310357704 |
Vendor Alias | DM-830A-C |
- 1 - Digital Multimeter
- 1 - Certificate of Calibration
- 1 - 9V Battery
- 1 - Set of Test Leads
- 1 - Bead Temperature Probe (400°F/204°C max)
- 1 - Protective Boot
- 1 - Carrying Case