Hioki CM4371-90
True-RMS AC/DC Clamp Meter, 1000V AC/DC, 600A AC/DC with Z3210 Wireless Adapter
CM437190
CM4371-90
Hioki CM4371-90
True-RMS AC/DC Clamp Meter, 1000V AC/DC, 600A AC/DC with Z3210 Wireless Adapter
CM437190
CM4371-90
The Hioki CM437190 True-RMS AC/DC Clamp Meter, 1000V AC/DC, 600A AC/DC with Z3210 Wireless Adapter features strong jaws, a broad -25°C to 65°C operating temperature range, and an IP54 dustproof and waterproof enclosure. This meter enables professionals to work quickly in tough situations, including the development, repair, and maintenance of equipment and devices.
- DC Current range: 20 A/600 A
- AC Current range: 20 A/600 A (10 Hz to 1 kHz, True RMS)
- DC Current range: 20 A/600 A; Basic accuracy: ±1.3% rdg. ±0.08 A (20 A range)
- AC Current range: 20 A/600 A (10 Hz to 1 kHz, True RMS); Basic accuracy, 45 to 66 Hz: ±1.3% rdg. ±0.08 A (at 20 A)
- Crest factor: 20 A range - 7.5; 600 A range - 3 or less
- DC+AC Current range: 20 A/600 A (10 Hz to 1 kHz, True RMS); Basic accuracy DC, 45 to 66 Hz: ±1.3% rdg. ±0.13 A (at 20 A)
- DC Voltage range: 600 ｍV to 1000 V (when using P2000: 600 V to 2000 V; P2000 NOT included)
- AC Voltage range: 6 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS); Basic accuracy, 45 to 66 Hz: ±0.9% rdg. ±0.003 V (at 6 V)
- DC+AC Voltage range: 6 V to 1000 V; 4 ranges; Basic accuracy DC, 45 to 66 Hz: ±1.0% rdg. ±0.013 V (at 6 V)
- Resistance range: 600 Ω to 6.000 MΩ; 5 ranges; Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω)
- Capacitance range: 1 μF to 1000 μF; 4 ranges; Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF)
- Frequency range: 9.999 Hz to 999.9 Hz; 3 ranges; Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz)
- Temperature (K): -40 to 400 ˚C
- Voltage detection: Hi - 40 V to 600 V AC; Lo - 80 V to 600 V AC, 50/60 Hz
- Harmonic levels: With Z3210 installed Voltage/Current harmonic levels up to 30th, Content factor, Total harmonic distortion ratio
- Dustproof, waterproof: IP20 (Voltage measurement in completely dry conditions when jaw closes); IP54 (while in storage)
- Core jaw diameter: φ33 mm (1.30 in), Jaw dimension: 69 mm (2.72 in) W x 14 mm (0.55 in) D
The Hioki CM4371-90 True-RMS AC/DC Clamp Meter, 1000V AC/DC, 600A AC/DC with Z3210 Wireless Adapter features strong jaws, a broad -25°C to 65°C operating temperature range, and an IP54 dustproof and waterproof enclosure. This meter enables professionals to work quickly in tough situations, including the development, repair, and maintenance of equipment and devices.
Wireless Support
When the Wireless Adapter Z3210 is installed, Bluetooth wireless communication is enabled. It transfers measurements to smart devices, such as smartphones or tablets, and allows users to quickly create reports with field photos and drawings.
NOTE: This instrument can be used to measure voltages in excess of 1000 V DC if (and only if) both of the following conditions are satisfied:
- 1. The circuit under measurement is isolated from the commercial power grid.
- 2. The circuit under measurement is isolated from ground.
NOTE: Do NOT use this instrument with circuits with a terminal-to-ground voltage exceeding 1000V. Doing so may result in electric shock.
NOTE: In the 1500V range, this instrument can withstand inputs of up to 1000V continuously, or an input in excess of 1000V for no longer than 1 minute.
| Brand | Hioki |
|---|---|
| Condition | NEW |
| Vendor Alias | CM4371-90 |
- 1 - True-RMS AC/DC Clamp Meter, 600A AC/DC
- 1 - Wireless Adapter (Z3210)
- 1 - Test Lead (L9300)
- 1 - Carrying Case (C0203)
- 2 - LR03 Alkaline Batteries
- 1 - User Manual
