The Hioki LR8450-01 KIT Multi-Channel Data Logger Kit includes the LR8450-01 Memory HiLogger, which is a high-speed data logger for recording multiple channels of voltage, temperature, resistance or humidity signals, with some module models (sold separately) providing complete isolation between channels and strong noise resistance. The LR8450-01 offers 1ms sampling across up to 330 channels, and can be paired with 10 different types of plug-in or wireless input units (sold separately). The logger can collect data from wireless modules installed in remote or confined locations via a LAN connection. Special input modules measure strain and distortion, making the logger also ideal for automotive applications involving the evaluation of vehicle components as well as robotic equipment.

Wireless units can easily be registered

The LR8450-01 Memory HiLogger is a data logger equipped with wireless LAN. It is ideal for collecting data in dispersed locations and locations where wiring is difficult. Users can add up to 7 wireless units (sold separately) and measure up to 330 channels. In just two easy steps, the logger will register the wireless units onto the main module.

Stable logging - even at high voltages and frequencies

The LR8450-01 reduces the effects of noise to deliver stable logging, even at high voltages and frequencies. Legacy data loggers could not log temperature accurately in noisy environments due to the effects of high frequencies, which caused values to shift or fluctuate significantly. The LR8450-01 uses a revamped design to dramatically reduce the effects of high-frequency noise, and is ideal for temperature logging of inverters and batteries.

Add up to 7 total wireless units for a maximum of 330 channels

By connecting four U8552 Voltage/Temperature Units (sold separately) and seven LR8532 Wireless Voltage/Temperature Units (sold separately), users can measure a total of 330 channels.

Sample output from a variety of sensors

The LR8450-01 measures at a sampling rate of up to 1 ms. The 1 ms sampling rate is the best match to measure sensor outputs with a frequency response of under 100 Hz, for example pressure and vibration sensors.

Measure strain with a 1 ms sampling rate

Connect strain gauges directly and measure at a sampling rate of up to 1 ms. Strain gauges tend to have long, thin wires that are easily broken, but that potential pitfall can be avoided by using wireless units so that wire length is minimized.

Measure temperature near an inverter or battery

Use plug-in or wireless units (sold separately) to make temperature measurements at a sampling rate of up to 10 ms.

Make measurements in difficult to reach location

Work time can be reduced by using the LR8450-01 and wireless units, since only minimal wiring is required. If the measurement target is located in a lab, this approach eliminates the need to string wire and drill holes in the walls of the monitoring room where data is checked.

Observe data from a remote location

By connecting the LR8450-01 to a PC or tablet via a wireless LAN, users can control the instrument remotely using the built-in HTTP server or download data files using the built-in FTP server.