IDEAL Electrical 33-856

VDV Multimedia Voice, Data, and Video Wiremapper and Tester

33856
33-856

IDEAL Electrical 33-856

VDV Multimedia Voice, Data, and Video Wiremapper and Tester

33856
33-856

The IDEAL Electrical 33856 VDV Multimedia Voice, Data, and Video Wiremapper and Tester is an LCD based all-in-one tester for verifying proper wiring of low-voltage and data communications cables. The wiremap test visually shows, pin by pin, whether a cable is terminated properly at both ends, and if there is end-to-end continuity.

  • Voice/Data/Video LCD based wiremapper verifies cable continuity
  • Test results displayed on LCD in pin-to-pin format
$105.50
This item ships FREE
In stock: 1 Units
  • Voice/Data/Video LCD based wiremapper verifies cable continuity
  • Test results are displayed on the LCD in a pin-to-pin format
  • Error types: shorts, opens, miswires, reversals, and split pairs
  • For twisted pair, coax, and phone type cables
  • Designed for CAT3/5/5e/6/6a cables; RG59/6/6 Quad
  • Shield continuity can also be tested on shielded RJ-45 connectors and cables
  • In Voice mode, RJ-11/12 port is active; testing similar to Data test, but tests up to 6 conductors instead of 8
  • In Video mode, F port is active; coax cables are tested for opens and shorts on pin and shield
  • Tone generator with 4 selectable tones
  • Tone by pin, pair, or entire cable
  • Main remote included, stored in base of unit
  • Remote #1 included to terminate far end of cable run

The IDEAL Electrical 33-856 VDV Multimedia Voice, Data, and Video Wiremapper and Tester is an LCD based all-in-one tester for verifying proper wiring of low-voltage and data communications cables. The primary function of the 33-856 VDV is wiremap test. The wiremap test visually shows, pin by pin, whether a cable is terminated properly at both ends, and if there is end-to-end continuity. The VDV can test Data/Ethernet RJ-45 (8P8C), Voice/Phone RJ-11/12(6P6C/6P4C), and Video/coax cables. The LCD visually displays either "PASS" or "ERROR" after each test, in order to verify if the cable is terminated correctly.

In Data mode, the RJ-45 port tests RJ-45 connector cables terminated to Cat 3/5/5e/6/6a twisted pair cables. When the test is activated, VDV checks each conductor of the cable for any opens (terminated, or cut conductors); shorts (cut or nicked conductors that come into contact); miswires (wires out of order, or inconsistent at both ends); reversals; and split pairs (wired correctly, but using the wrong conductor order and grouping). VDV can accurately identify and alert the user to uplink/crossover cables.

For all tests, the included main remote (Remote #1) is used to terminate the far end of the cable run. The main remote is stored in the base of the tester when not in use.

The IDEAL Electrical 33856 VDV has a built-in analog tone generator is also included and can be used in all testing modes. The tone generator has 4 user selectable tones. Toning helps to locate and identify a single cable that is within a bundle of cables. The tone generator has the ability to tone by pin, by pair, or all of the conductors at once. This allows the user to more precisely locate errors within the cable, such as finding opens.

More Information
Country of OriginChina
BrandIDEAL Electrical
ConditionNEW
UPC783250585359
Vendor Alias33-856
  • 1 - VDV Main Test Unit
  • 1 - Built-in RJ45 and RJ11 Remotes
  • 1 - RJ45 Jumper Cable
  • 1 - RJ11 Jumper Cable
  • 1 - User Manual