IDEAL Electrical 85-377J

CAT6 Feed-Thru Modular Plugs (Jar of 100)

85377J
85-377J

IDEAL Electrical 85-377J

CAT6 Feed-Thru Modular Plugs (Jar of 100)

85377J
85-377J
  • Feed-Thru design simplifies connector to cable assembly
  • Flush cut of excess conductors minimzes inadvertent contact outside of the plug
$53.40 Price $68.29
This item ships FREE
In stock: 1 Units
  • Feed-Thru design simplifies connector to cable assembly
  • Flush cut of excess conductors minimzes inadvertent contact outside of the plug
  • 8 position, 8 contact RJ-45 modular plug for CAT6, 100Ω balanced twisted pair 250 MHz cables
  • Compatible with most #24 AWG CAT5e cables as well
  • 50 micro-inch gold plating on contact mating area for long term reliability in connectivity, even after hundreds of mating cycles
  • Complies with industry standard mechanical and electrical specifications for compatibility with compliant modular jacks and ports
  • Designed for best performance when used with IDEAL FT-45™ crimp tools (30-495)
  • Also compatible for crimping (no cutting of conductors) in IDEAL Telemaster™ crimping tools
  • Three prong contact design for use with solid or stranded #23-#24 AWG insulated copper conductors up to 0.041 in. diameter
  • Accepts outer jacket cable diameters up to .280 in.
  • Permanent connection; once crimped these cannot be reused
  • Primary strain relief support retains cable jacket and minimizes conductor movement once crimped
  • Jar of 100

The IDEAL Electrical 85377J CAT6 Feed-Thru Modular Plugs (Jar of 100) offer a flush cut of the excess conductors to the faces of the modular plugs. The flush cut eliminates inadvertent contact among adjacent conductors or with the mating jack. Conductor spacing is maintained for reliable performance in PoE and data applications.

Feed-Thru connectors have several additional advantages and improvements to traditional closed end modular plugs in assembly and termination:

  • As conductors feed-thru the connector face, all are visibly inserted far enough to be pierced by the pin below - eliminates short wires or opens.
  • Conductor order can then be verified before the connector is crimped. This elimates wasted connectors, saves time in assembly, and reduces the chances of finding an error during a wiremap test of the cable.
  • The cable can be pushed or pulled into the connector to ensure that the twisted pairs are within 1/4" of the pin contacts and that the jacket is seated beyond the primary strain relief for a secure connection-better NEXT performance, minimal untwisted wires.
  • CAT6 single piece connector, no special assembly or sled and liner required help to simplify the assembly process - no measuring or exact cutting required.
More Information
BrandIDEAL Electrical
ConditionNEW
UPC783250804399
Vendor Alias85-377J
  • 100 - CAT6 Feed-Thru Modular Plugs