Instek GPM-8320
2 Channel Digital Power Meter with LAN/USB/RS-232
The Instek GPM-8320 Digital Power Meter is designed specifically for measuring power in three-phase AC power sources which makes it ideal for most electrical and electronic product testing applications. Two modules are included with this unit.
- Number of Channels: 2
- Voltage/Current Test Frequency Bandwidth (DC): 0.1Hz-100kHz
- Meets IEC 61000-4-7 Harmonic Measurement (50/60Hz)
- Interface: RS-232C, USB Device/Host, LAN
- 2 Channel Digital Power Meter LAN/USB/RS-232
- 5" TFT LCD
- Voltage/Current Test Frequency Bandwidth: DC, 0.1Hz-100kHz
- Waveform Display : V (Voltage), I (Current), P (Wattage)
- Distorted wave Current/Voltage measurement: full range for CF=3, and half range for CF=6 (or 6A)
- Meeting IEC 61000-4-7 harmonic measurement (50/60Hz)
- Wiring selecting button (1P3W,3P3W,3P4W,3V3A)
- Harmonic measurement and analysis up to 50 orders
- Auto ranging function for Integration mode
- Screen Capture through USB host
- Provide external current sensor input (EXT1/EXT2)
The GW Instek GPM-8320 is a two channel digital power meter designed specifically for measuring power in three-phase AC power sources, making it suitable for most electrical and electronic product testing applications. The GPM-8320 provides 2 modules. The GPM-8320 has a testing bandwidth of DC, 0.1Hz-100 kHz and features 16-bit A/D converters and a sampling rate of 300 kHz. A 5-inch TFT LCD display, 5 digits of measurement readings, 25 different power measurement parameters, and high precision measurement capabilities are also provided.
The GPM-8320 also features waveform display capabilities (voltage/current/power), the integration measurement function, harmonics measurement and analysis of multiple orders (50/60Hz measurement complies with IEC61000-4-7 requirements), external sensor input terminals, and a variety of communications interfaces. These features help users achieve clear, convenient, and accurate power measurements, making them the most fully-featured and cost-effective power meters in the same category.
The GPM-8320 provides multiple input voltage configuration wiring modes (1P3W/3P3W/3P4W/3V3A). Users can choose the wiring mode according to their specific requirements to measure parameters for specific wiring methods, and even calculate efficiency. In addition, for a rated input voltage of 1000V and an input current of 20A, they support a minimum current range of 0.5A (resolution of 0.1mA), power measurement resolution of 0.1mW, crest factor of 3 (for half range, the CF can reach up to 6 or 6A), and voltage/current/power measurement accuracy of ±0.1% reading ±0.05% range. Users can select different measurement modes (AC+DC/ AC/ DC/ V-MEAN) to provide up to 25 related parameters for power measurement.
These parameters include voltage (Vrms/ Vac/ Vdc/ Vmn/ V+pk / V-pk), current (Irms/ Iac/ Idc/ I+pk/ I-pk), frequency (VHz/ IHz), power (P/ P+pk/ P-pk), crest factor (CFV/ CFI), apparent power (VA), reactive power (VAR), power factor (PF), phase angle (DEG), total harmonic distortion (THDV/ THDI), maximum current ratio (MCR), and MATH calculation function. Therefore, they provide the best range and accuracy support for measuring the power consumption of electrical and electronic products.
The GPM-8320 offers a comprehensive and diverse set of communications interfaces, including RS-232/USB/LAN, suitable for users to remotely control and collect measurement results through command sets to program computer software.
Brand | Instek |
---|---|
Condition | NEW |
- 1 - GPM-8320 2 Channel Digital Power Meter with LAN/USB/RS-232
- 1 - Safety Instruction Sheet
- 1 - Power cord
- 2 - Test leads GTL-212A
- 2 - Test leads GTL-209
- 1 - CD (including complete user manual and USB driver)
- 1 - GPM-002 Terminal Cover