Instek GSM-20H10G
Precision Source Meter with GPIB
The Instek GSM-20H10G DC Precision Source Meter provides highly stable DC power and instrument-grade 6-1/2 digit multimeter measurements. Suited for the evaluation of component characteristics and the test applications of production, this unit can be used as a voltage source, current source, voltmeter, ammeter and ohmmeter.
- Max Power: 22W
- Max Voltage/Current: ±210V/±1.05A
- Built-in 4 Sequence Output Modes
- Interface: RS-232, USBTMC, LAN, GPIB
- Maximum Output: ±210V/±1.05A/22W
- Built-in 4 Sequence Output Modes, up to 2500 Points
- OVP /OTP Protection Function
- 0.012% Basic Measure Accuracy with 6½-digit Resolution
- Variable Sampling Speed
- SDM (Source Delay Measure) Cycle
- 2-, 4-, and 6-wire Remote V-source and Measure Sensing
- Variable Display Digits
- Built-in Limit Function
- Built-in 5 Calculation Functions
- Standard SCPI Command, Provide Interface: RS-232, USBTMC, LAN, GPIB
- 4.3" TFT LCD, Digital Number Keypad
- Built-in RTC Clock
The GW Instek GSM-20H10G Precision Source Meter with GPIB provides highly stable DC power and instrument-grade 6-1/2-digit multimeter measurements. While operating, it can be used as a voltage source, current source, voltmeter, ammeter, and ohmmeter, which is uniquely ideal for the evaluation of component characteristics and the test applications of production, including nanomaterials and components, semiconductor architecture, organic materials, high-efficiency illumination, passive components and material characteristics analysis, etc.
GSM-20H10G provides four-quadrant operation of ±210V/±1.05A/22W. The first and third quadrants operate as power supplies to supply power to the load. The second and fourth quadrants function as loads to consume power internally. Voltage value, current value and resistance value can be measured while operating the power supply or load function with an accuracy of 0.012% and a resolution of 1µV/10pA/10µΩ.
With respect to sampling rate, GSM-20H10G supports a sampling rate of up to 50k points/second, which can accurately analyze the characteristics of the DUT. With the large 4.3-inch screen, all measurement settings, parameters and results can be completely displayed on the screen.
The SDM (Source Delay Measure) function is provided to delay sampling when the signal changes so as to prevent the unstable signal from being captured and cause misjudgment. There are four built-in sequence output modes (Linear stair, Log stair, SRC-MEM, Custom), which can support up to 2500 points of sequence variation output.
Pertaining to protection, GSM-20H10G provides OVP/OTP modes. The design of OVP allows users to self-define the range of OVP. OTP can effectively prevent errors caused by temperature drift during the test process. For interfaces, this product supports standard SCPI commands and provides RS-232, USBTMC, LAN, GPIB interfaces to meet user's different interface needs.
Country of Origin | China |
---|---|
Brand | Instek |
Condition | NEW |
Vendor Alias | GSM-20H10G |
- 1 - GSM20H10G with GPIB
- 1 - User Manual
- 1 - Quick Start Manual
- 1 - Test lead GTL-207A
- 2 - Alligator Clips