Instek GSP-8800 TG
9KHz-8GHz Spectrum Analyzer with Tracking Generator (Factory Installed)
Instek GSP-8800 TG
9KHz-8GHz Spectrum Analyzer with Tracking Generator (Factory Installed)
The Instek GSP-8800TG Spectrum Analyzer with Tracking Generator is suitable for teaching research, R&D verification, and the test requirements of radio frequency products during production and development stages. It provides -104dBc/Hz phase noise, a 20dB preamplifier, and the lowest noise floor of -160dBm/Hz (typical).
- Frequency: 9kHz to 8.0GHz
- Resolution Bandwidth (RBW): 1Hz to 1MHz
- Video Bandwidth (VBW): 10Hz to 3MHz
- Includes Tracking Generator
- Frequency Range: 9kHz to 8.0GHz
- RBW: 1Hz to 1MHz in 1-3-5-10 steps
- VBW: 10Hz to 3MHz in 1-3-5-10 steps
- Phase Noise: -104 dBc/Hz
- Sensitivity: -160dBm/Hz Typical @PreAmp On
- Built-in AM/FM Demodulation
- Built-in Time Spec Function
- Measurement Function: ACPR/OCBW/CHPW, NdB BW, Pass-Fail, Freq. Counter, Noise Marker
- Built-in 20dB Preamplifier
- Communication Interface: LAN, USB Host/Device
- Display: 10.4" XGA Output (1024 x 768)
- Includes Tracking Generator
- Applications:
- Checking and analysis of spectrum characteristics
- Analyze AM and FM signal characteristics
- Monitor signal uploaded by SNG vehicle
- For compact test system
- Measuring frequency response of attenuators, filters and amplifiers
The Instek GSP-8800TG Spectrum Analyzer with Tracking Generator is suitable for teaching research, R&D verification, and the test requirements of radio frequency products during production and development stages. It provides 1Hz to 1MHz resolution bandwidth (RBW), 10Hz to 3MHz video bandwidth (VBW), -104dBc/Hz phase noise, a 20dB preamplifier, and the lowest noise floor of -160dBm/Hz (typical).
With respect to measurement applications, the GSP-8800TG has a built-in Time Spec function, AM/FM signal demodulation function, channel test (Channel Power Measurement) function, Pass-Fail function, etc. The Time Spec function can simultaneously observe and display the correlation between power, frequency and time. ACPR/OCBW/CHPW tests can be used to test adjacent channels, power occupation bandwidth ratio, and channel power. The Pass-Fail function can be used to determine whether the signal is within the set range. Users can use these functions to conduct a wide range of measurement applications.
The GSP-8800TG utilizes a 10.4-inch TFT LCD large-size screen with XGA (1024 x 768) resolution to allow an easy observation of test signals. For communication interface, it provides two interfaces: USB and LAN. Through the USB Host, users can quickly retrieve the files stored after measurements, while USB Device and LAN interface allow users to control the instrument through dedicated PC software, or use the corresponding command set to design the required program.
Brand | Instek |
---|---|
Condition | NEW |
- 1 - Spectrum Analyzer with Tracking Generator (GSP-8800TG)
- 1 - Power Cord
- 1 - Factory Certification
- 1 - Safety information
- 1 - USB Cable