Instek PEL-2040B

Single-Channel DC Electronic Load Module (Only) for PEL-2000B Series Mainframes, 350W, 1~80V, 70A

PEL2040B
PEL-2040B

Instek PEL-2040B

Single-Channel DC Electronic Load Module (Only) for PEL-2000B Series Mainframes, 350W, 1~80V, 70A

PEL2040B
PEL-2040B

The Instek PEL-2040B Single-Channel DC Electronic Load Module (Only) allows for differing combinations of current, voltage, power, and number of channels that the mainframe unit can handle for a tailored test system. This module works with the standard interfaces of USB, RS-232C/RS-485, and LAN.

  • Number of Channels: 1
  • Power: 35/350W (Left/Right Channel)
  • Current: 7/70A (Low/High Range)
  • Voltage: 0-80V
  • Note: Module requires compatible mainframe housing to function properly; mainframe housing not included
  • Parallel testing for both static and dynamic tests
  • 12 different programs
  • 10 sequences to each program
  • 120 different configurations
  • USB, RS-232C/RS-485, and LAN interfaces included
  • Labview driver and Data Logging PC software are supported for all interfaces
  • Analog control/monitoring connector to externally turn load on/off and to externally monitor load input current and voltage
  • Specifications:

  • Number of Channels: 1
  • Power: 350W
  • Current: 0~7A (Low)/0~70A (High)
  • Voltage: 0~80V
  • Min. Operating Voltage: 0.4V at 7A - 0.2V at 3.5A (Low)/0.8V at 70A - 0.4V at 35A (High)
  • Input Resistance (Load Off): 500 kΩ (Typical)
  • Power Source: 100-120V AC/200-240V AC (90-132V AC/180-250V AC), 47~63Hz
  • Weight: Approx. 3.8kg

The Instek PEL-2040B is a single channel 1~80V/70A/350W DC electronic load optional module (only) is suited for use with any PEL-2000B series mainframe. When attached to the mainframe, the module is able to tailor a test system based on the number of channels, maximum load power, and voltage and current of each channel.

Note: The PEL-2040B module requires the user to attach a compatible mainframe, in order for it to function properly (mainframe not included).

More Information
BrandInstek
ConditionNEW
  • 1 - Single-Channel Electronic Load Module (PEL-2040B)
  • 1 - Test Lead (GTL-120)
  • 1 - Sense Lead (GTL-121)