Megger MIT2500
2.5 kV High Voltage Hand-Held Insulation and Continuity Tester
MIT2500
MIT2500
1004-745
Megger MIT2500
2.5 kV High Voltage Hand-Held Insulation and Continuity Tester
MIT2500
MIT2500
1004-745
The Megger MIT2500 Insulation and Continuity Tester has been designed for motor and cable testing, specialist applications and electrical testing applications where operation voltages exceed 1000V and higher insulation test voltages are needed.
- Ideal tester for high voltage electrical and industrial applications
- Performs insulation resistance tests up to 2.5kV with 200 Giga-ohms maximum resistance
- Guard terminal for high resistance accuracy
- Ideal tester for high voltage electrical and industrial applications
- Performs insulation resistance tests up to 2.5 kV with 200 Gigaohms maximum resistance
- Stabilized insulation test voltage remains within specification
- Guard terminal allows for high accuracy at higher voltages
- Adjustable insulation test voltage from 50 V to 2500 V
- Single range, faster continuity testing from 0.01 ohm to 1 Megaohm
- Provides clear readout on digital display with large characters and analog arc
- Offers PI, DAR, and timed test modes
- Detects live voltages and inhibits insulation testing above user-selected thresholds
- Buzzer limit alarms may be set for continuity and insulation tests
- Test lock function holds insulation test on continuously
- Rechargeable options for mains and car charging
- Suitable for use on CAT IV applications and supply voltages to 600 V
The Megger MIT2500 (1004-745) Insulation and Continuity Tester has been designed for motor and cable testing, specialist applications and electrical testing applications, where operation voltages exceed 1000 V and higher insulation test voltages are needed.
The MIT2500 offers both fixed range voltages of 50 V, 100V, 250 V, 500 V, 1000 V and 2500 V, as well as a variable range that allows any voltage between 50 V and 2500 V to be "dialed in". This is supported by the test voltage feedback control, which maintains the output test voltage to within 2% of the selected range, even when under testing.
The MIT2500 uses a redesigned case, back-stand, and 6-cell battery compartment. The tester furthermore has an incorporated guard terminal to reduce surface tracking currents that reduce accuracy at higher voltages. The MIT2500 is over-molded for increased protection and to achieve an IP54 weatherproof rating.
| Country of Origin | United Kingdom |
|---|---|
| Brand | Megger |
| Catalog | 1004-745 |
| Condition | NEW |
| Vendor Alias | 1004-745 |
- 1 - MIT2500 Insulation and Continuity Tester (1004-745)
- 1 - Set of 1 kV Silicone Test Leads with Probes and Clips (Red, Black, Blue)
- 1 - Set of 2.5 kV Silicone Test Leads with Clips (Red, Black, Blue)
- 1 - Owners Information CD
- 6 - AA Alkaline Batteries (1002-753)
- 1 - Hard Carrying Case (2006-649)
Customers Also Bought
