Milwaukee MC410
TDS PPM Monitor
The Milwaukee MC410 Conductivity Monitor is designed to continuously monitor pH, EC or TDS values directly in the users reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either above or below the user-selected set-point.
- Range: 0 to 1990 ppm; Resolution: 10 ppm
- User selectable high/low set point
- Manual 1 point calibration
- Automatic temperature compensation
- Conductivity, TDS monitor using MA81/2 PPM probe with 2 M cable (BNC connector)
- Range: 0 to 1990 ppm; Resolution: 10 ppm
- User selectable high/low set point
- Manual 1 point calibration
- Automatic temperature compensation
- Visual LED alarm
- Works with 12 VDC adapter
The Milwaukee MC410 conductivity monitor is designed to continuously monitor pH, EC or TDS values directly in your reservoir. The MC410 is ideal for the hydroponic market and allow you to continuously monitor EC or TDS values directly in your reservoir.
Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either above or below the user-selected set-point.
The Milwaukee MC410 monitor runs on a 12V adapter so there's no need to worry about failed batteries.
Brand | Milwaukee |
---|---|
Catalog | MC410 |
Condition | NEW |
UPC | 810666004409 |
Vendor Alias | MC410US |
- 1 - MA9310 12V DC Adapter
- 1 - MA812/2 TDS Probe
- 1 - 20 mL 1382 ppm Calibration Solution Sachet
- 1 - Calibration Screwdriver
- 1 - Instruction manual