NAVAC NTB7L
BreakFree Power Tube Bender Kit, 7/8 in Max OD, 7.2V 2Ah 14.4Wh
The NAVAC NTB7L BreakFree Power Tube Bender Kit eliminates the labor involved in tube bending by allowing for the user to bend tubes to any desired angle with a single press of the controller switch. Once a bend is completed, the included baffle will push the tube out automatically while the tool resets which allows for easier tube removal.
- Tubing Type: Soft (HVACR) Copper
- Tubing O.D. 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"
- Power: 7.4V/2Ah/14.8Wh
Battery-Driven Effortless Bending
- Powerful for Large Size Tubing
- Push and Hold for 90° Bending
- Automatic Tube Release
- Tubing Type: Soft or Annealed Copper
Patented Tubing Size Selector
- 7 Sizes in One Selector
- Easy to Switch to Different Tubing Size Setting
- Tube OD: 1/4 in, 5/16 in, 3/8 in, 1/2 in, 5/8 in, 3/4 in, 7/8 in
Easy Operation
- Ergonomic Handle Design
- Stop Any Time for Customized Angles
Large Lithium Battery
- Over 100 Bends Per Charge
- Quick Charge in 30 Minutes
Other Features
- Quick Connect Mandrel and Crossbar
- Battery Power Indicator
- Battery Type: 7.2V 2Ah 14.4Wh
- Includes Carry Case
The NAVAC NTB7L BreakFree Power Tube Bender Kit is suitable for tubing sizing 1/4” to 7/8” OD. The NTB7L saves tons of time and labor, and makes the job much easier. By pressing a single controller switch, the user can bend the tube to any desired angle. When a bend is completed, the baffle will push the tube out automatically while tool resets, helping to remove the tube effortlessly. Its large capacity lithium battery makes over 100 bends each charge and can be fully charged in 30 minutes.
Brand | NAVAC |
---|---|
Condition | NEW |
UPC | 811245031090 |
Vendor Alias | NTB7L |
- 1 - NAVAC NTB7L Power Tube Cutter
- 1 - Carry Case