Oakton Instruments WD-35634-66
pHTestr 5 Waterproof pH Pocket Tester with pH Buffer Pouches
Oakton Instruments WD-35634-66
pHTestr 5 Waterproof pH Pocket Tester with pH Buffer Pouches
The Oakton Instruments WD-35634-66 is a pHTestr 5 Waterproof pH Pocket Tester with pH Buffer Pouches. It has a replaceable single-junction sensor and large LCD with three-color backlight. It has a hold function, self-diagnostic error message and status icons. The IP67-rated housing floats in water. It has 3-point pH calibration with NIST or US auto buffer recognition and automatic temperature compensation.
- Leakproof cap with fill line
- Features glass bulb probe
- Large easy-to-read LCD features three-color backlight
- Simple to calibrate with automatic standard recognition
- Rugged IP67-rated housing is waterproof, dustproof, and floats in water with sensor cap on
- Leakproof cap with fill line functions as sample/calibration and hydrating cup
- Securely attach lanyard to prevent losing or dropping in field
- Auto shut-off extends battery life
- Features glass bulb probe ideal for general liquid testing
- Display type: Dual-line LCD
- Min pH (pH): -2
- Max pH (pH): 16
- pH resolution: 0.01 pH
- pH accuracy: ±0.01 pH ±1 digit
- Buffer recognition: NIST and USA
- Calibration: 1 to 3 points
- Min temperature (°C): 0
- Max temperature (°C): 50
- Min temperature (°F): 32
- Max temperature (°F): 122
- Temperature resolution: 0.1°F/°C
- Temperature accuracy: ±0.9°F (0.5°C)
- Temperature compensation: Automatic
- Waterproof: Yes
- Power: 4 x AAA batteries (included)
- Battery life (hr): 400
- Oakton pH Calibration Buffer Pouches
- Single-use pouch
- Just tear, dip, calibrate
- Standardized to NIST-traceable pH references
- Sold in packs of 20 pouches
The Oakton WD3563466 pHTestr 5 Waterproof pH Pocket Tester with pH Buffer Pouches has a replaceable single-junction sensor which can be easily switched out, allowing you to save money by using the tester body over and over again. A large LCD makes viewing measurements easy and features a three-color backlight indicating operational mode-blue for measurement, green for calibration and red for alarm condition.
Additional features include hold function to lock in measurements, self-diagnostic error message, and status icons for measurement stability and low battery voltage. The IP67-rated housing features an easy-to-grip design and floats if accidentally dropped in water when the sensor cap is on. Powered by four AAA batteries, the 35634-66 can operate up to 400 hours continuously. To conserve power, the unit will auto power-off after 8 minutes of nonuse.
The WD-35634-66 features up to 3-point pH calibration with NIST or US auto buffer recognition, a pH range from -1 to 15 with an accuracy of ±0.01 pH, and automatic temperature compensation.
Brand | Oakton |
---|---|
Catalog | 35634-66 |
Condition | NEW |
Vendor Alias | 35634-66 |
- 1 - pHTestr 5 Waterproof pH Pocket Tester
- 1 - Lanyard
- 1 - Buffer Solution Pack
- 1 - Protective Plastic Storage Case
- 4 - AAA Batteries