Oakton Instruments WD-35635-15
T-100IR Portable Infrared Turbidity Meter Kit
Oakton Instruments WD-35635-15
T-100IR Portable Infrared Turbidity Meter Kit
The Oakton Instruments WD-35635-15 is a T-100IR Portable Infrared Turbidity Meter Kit with five calibration points—0 NTU, 20 NTU, 100 NTU, 400 NTU, and 800 NTU. The 0 NTU uses laboratory distilled or deionized water and the others use high molecule polymer standard solutions. The large TFT screen has a two-color backlight with operation guides. A USB interface cable transfers data to a computer.
- Stores up to 200 sets of data
- Meets IP67 water-resistant requirements
- Auto-ranging from 0 to 1000 NTU (FNU)
- Stores up to 200 sets of data
- Suitable for field use meets IP67 water-resistant requirements
- Infrared light source delivers high accuracy across entire range
- Meets performance criteria as specified by ISO 7027 (DIN EN 27027) method
- Meter type: Portable
- Display type: TFT color screen
- Min turbidity: 0 NTU
- Max turbidity: 1000 NTU
- Turbidity resolution: 0.01, 0.1, 1 NTU
- Turbidity accuracy: ≤ ±2% of reading
- Min temperature (°C): 0
- Max temperature (°C): 50
- Min temperature (°F): 32
- Max temperature (°F): 122
- Output: USB
- Memory Size: 500 sets of data
- Waterproof: Yes
- Power: 4 x AA batteries (included)
The Oakton WD3563515 T-100IR Portable Infrared Turbidity Meter Kit features five calibration points-0 NTU, 20 NTU, 100 NTU, 400 NTU, and 800 NTU. The 0 NTU uses laboratory distilled or deionized water, while the other four calibration points are configured using high molecule polymer standard solutions included in the kits. The WD-35635-15 meter also includes normal and continuous measurement modes, parameter setup, data recall, real-time clock, calibration date check, automatic power off, and low voltage indication. The continuous measure mode allows you to automatically generate average, maximum and minimum measured values in a data storage interface, suitable for sample solutions with rapid settling and continuous measurement changes.
The large TFT color screen displays a blue background for measurement mode, green background for calibration mode, and features operation guides for easy calibration and measurement. Up to 200 sets of data can be stored on the meter. A USB interface cable can transfer this data to a computer for future analysis.
Brand | Oakton |
---|---|
Catalog | 35635-15 |
Condition | NEW |
Vendor Alias | 35635-15 |
- 1 - T-100IR Portable Infrared Turbidity Meter
- 6 - 25 x 60 mm Sample Test Cuvettes
- 5 - 60-mL Polymer Standard Calibration Solutions (0.0, 20, 100, 400, and 800 NTU)
- 1 - 10 mL Silicone Oil
- 1 - Microfiber Wiping Cloth
- 1 - PCLink Software on USB Flash Drive
- 1 - Hard Carrying Case
- 1 - Rechargeable Lithium battery with USB Cable/Power Adapter