Onset CX450
InTemp Temperature/Relative Humidity Data Logger
The Onset CX450 InTemp Temperature/Relative Humidity Data Logger monitors temperature and relative humidity in storage or transportation environments. Users can view and display minimum and maximum readings without affecting logged data. Unique audible alarms for temperature, RH, and combined temperature/RH are all present.
- Temp. Range: -22° - 158°F
- Relative Humidity Range: 0 - 95% (non-condensing)
- GDP/GMP compliant
- Easy logger setup and data download in seconds
- LCD display, with ability to clear min/max temp and RH readings
- Unique audible alarms for temp, RH, and combined temp/RH
- AAA battery-powered to guard against local power loss
- + 0.5C accuracy for reliable temperature readings from -30C to 70C
- + 3% accuracy for reliable RH readings from 0% to 90% (+ 3.5% accuracy for reliable RH readings greater than 90% at 25C)
- Two-point NIST Certificate of Calibration, good for one year
- Free InTemp mobile app to configure logger, view data, and access the free InTempConnect cloud software service
- Real-time alerts and automatic data downloads with optional CX5000 Gateway device
- Operates in a cold chain environment
- Measurements: Relative Humidity and Temperature
- Data Logger
- Radio Power: 1 mW (0 dBm)
- Transmission Range: Approximately 30.5 m (100 ft) line-of-sight
- Wireless Data Standard: Bluetooth Low Energy (Bluetooth Smart)
- Logger Operating Range: -30° to 70°C (-22° to 158°F), 0 to 95% RH (non-condensing)
- NIST Calibration: Two-point NIST calibration included
- Logging Rate: 1 second to 18 hours
- Time Accuracy: ±1 minute per month at 25°C (77°F)
- Battery Type: Two AAA 1.5 V alkaline or lithium batteries, user replaceable
- Battery Life: 1 year, typical with logging interval of 1 minute. Faster logging intervals, remaining connected with the InTemp app, excessive report generation, numerous audible alarms, and paging all impact battery life.
- Memory: 178 KB (103,400 total measurements or 51,700 temp and RH paired measurements)
- Full Memory Download Time: Approximately 60 seconds; may take longer the farther the device is from the logger
- LCD: LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range
- Dimensions: 9.4 x 5.6 x 2.59 cm (3.7 x 2.21 x 1.02 inches)
- Weight: 90.2 g (3.18 oz)
- Environmental Rating: IP54
- Temperature Sensor
- Range: -30° to 70°C (-22° to 158°F)
- Accuracy: ±0.5°C from -30° to 70°C (±0.9°F from -22° to 158°F)
- Resolution: 0.024°C at 25°C (0.04°F at 77°F)
- Drift: <0.1°C (0.18°F) per year
- RH Sensor
- Range: 0 to 95% (non-condensing)
- Accuracy: ±3% from 0% to 90% and ±3.5% from greater than 90% typical at 25°C (77°F)
- Resolution: 0.01%
- Drift: <1% per year typical
The Onset CX450 InTemp Temp/Relative Humidity Data Logger measures temperature and relative humidity (RH) for storage and transportation monitoring in the pharmaceutical, life science, and medical industries. This Bluetooth® Low Energy-enabled logger is designed for wireless communication with a mobile device. Using the InTemp app, you can easily configure the logger, download reports, and monitor tripped alarms. Or, you can use InTempConnect® to configure and download the logger via the CX5000 Gateway. Use the built-in LCD screen on the logger to view the current temperature and humidity, logging status and battery usage, and also to check and clear maximum and minimum readings. Once data is uploaded to InTempConnect, you can track logger configurations and automatically upload logger data to build custom reports for further analysis.
Brand | Onset |
---|---|
Condition | NEW |
Vendor Alias | CX450 |
- 1 - InTemp Temperature/Relative Humidity Data Logger (CX450)
- 2 - AAA 1.5 V Alkaline Batteries
- 1 - Battery Door and Screw
- 1 - NIST Certificate of Calibration