Onset RXMOD-A1
RX3000 4-Channel Analog Sensor Module
RXMODA1
RXMOD-A1
Onset RXMOD-A1
RX3000 4-Channel Analog Sensor Module
RXMODA1
RXMOD-A1
- Each module can have its own logging rate
- Environments: The RXMOD-A1 Accessory is for use in Indoor and Outdoor environments
- Each module can have its own logging rate
- Environments: The RXMOD-A1 Accessory is for use in Indoor and Outdoor environments
- Measurements: 4-20mA, Air Velocity, Carbon Dioxide, Compressed Air Flow, DC Current, DC Voltage , Differential Pressure, Gauge Pressure, Kilowatts (kW), Volatile Organic Compound
- Input Channels: Four, single-ended, in addition to smart sensor data channels
- Measurement Range and Accuracy: 0–25.6 mA DC, ±5 µA ± 0.15% of reading; 0–2.5 V DC, ±0.25 mV ±0.2% of reading; 0–5 V DC, ±0.25 mV ±0.2% of reading; 0–10 V DC, ±0.3 mV ±0.2% of reading; 0–20 V DC, ±0.6 mV ±0.2% of reading; 0–33 V DC, ±1.20 mV ±0.2% of reading
- Resolution: 15 bits
- Field Wiring: Two- or three-wire via screw terminals, 16–24 AWG
- Minimum/Maximum Input Voltage: 0/33 V DC
- Minimum/Maximum Input Current: 0/25.6 mA
- Minimum Source Impedance for Current Measurement: 20 K Ohm
- Excitation Voltage: 12 V DC ±5% at 200 mA maximum per module
The optional analog module has four analog inputs that support excitation power, scaling, and statistics measurements. These four, single-ended sensor inputs are configured through HOBOlink. Note: A HOBO RX3000 is required for this product to work.
| Brand | Onset |
|---|---|
| Condition | NEW |
