Onset MX2001-02-SS
HOBO Stainless Steel Bluetooth Freshwater Water Level Data Logger and 30m (100 ft.) Sensor Set
MX200102SS
MX2001-02-SS
Onset MX2001-02-SS
HOBO Stainless Steel Bluetooth Freshwater Water Level Data Logger and 30m (100 ft.) Sensor Set
MX200102SS
MX2001-02-SS
The Onset MX200102SS HOBO Stainless Steel Bluetooth Freshwater Water Level Data Logger/30m (100 ft.) Sensor Set consists of a top-end unit and water level sensor and is designed for a convenient wireless setup via Bluetooth technology. Water level and temperature readings can be viewed from a mobile phone, tablet, or Windows computer via the HOBOconnect app.
- Requires HOBOconnect app/direct read cable (sold separately) to operate
- Operation Range: 0 - 207 kPa
- NOTE: This product requires HOBOmobile App and Direct Read Cable (sold separately) to operate
- Stainless Steel
- Wireless data offload to mobile devices using Bluetooth Low Energy (BLE)
- Direct-read cable (sold separately) connects sensor to top-end logger/transmitter
- Logger and sensor add 0.39 meters to length of cable
- Cable length can vary up to 3% from the length ordered
- Reference water level can be entered at start of deployment
- Use HOBOconnect for setup, data viewing, and data sharing
- Powered by two user-replaceable AA batteries
- Logging modes: Normal, multi-rate, and burst
- Durable ceramic sensor
- 3-point NIST-traceable calibration certificate included for water pressure sensor
- Environments: Top-end logger operates in outdoor environments and is rated for intermittent 100% RH conditions up to 50°C; water level sensor and cable are waterproof
- Measurements: Absolute Pressure, Barometric Pressure, Differential Pressure, Temperature, Water Level and Water Temperature
- Operation Range: 0 to 400 kPa (0 to 58 psia); approximately 0 to 30.6 m (0 to 100 ft) of water depth at sea level, or 0 to 33.6 m (0 to 111 ft) of water at 3,000 m (10,000 ft) of altitude
- Factory Calibrated Range: 69 to 400 kPa (10 to 58 psia), 0° to 40°C (32° to 104°F)
- Burst Pressure: 500 kPa (72.5 psia) or 40.8 m (134 ft) depth
- Water Level Accuracy: Typical error: ±0.05% FS, 1.5 cm (0.05 ft) water; Maximum error: ±0.1% FS, 3.0 cm (0.1 ft) water
- Raw Pressure Accuracy: ±0.3% FS, 1.20 kPa (0.17 psi) maximum error
- Resolution: 0.04 kPa (0.006 psi), 0.41 cm (0.013 ft) water
- Pressure Response Time (90%): 1 second at a stable temperature
The Onset MX2001-02-SS HOBO Stainless Steel Bluetooth Freshwater Water Level Data Logger and 30m (100 ft.) Sensor Set is designed for convenient wireless setup and download from mobile devices via Bluetooth Low Energy (BLE) technology. The logger dramatically simplifies and lowers the cost of field data collection by providing wireless access to high-accuracy water level and temperature measurements right from a compatible device.
Accurate Data, Easily
Onset's HOBOmobile app makes it a snap to configure the HOBO MX2001-02-SS logger and manage the collected data. You can view data in graphs, check the operational status of loggers, configure alarm notifications, and share data files.
Note: MX2001-02-SS data loggers require the HOBOmobile App (free to download below) and a compatible mobile device, as well as a Direct Read Cable (CABLE-DR-XXX) to operate.
Download HOBOmobile App
for iOS Mobile Devices
Download HOBOmobile App
for Android Mobile Devices
| Brand | Onset |
|---|---|
| Condition | NEW |
| Vendor Alias | MX2001-02-SS |
- 1 - HOBO MX2001 Water Level Data Logger Set (Includes Top-End and Sensor-End, Connected by Direct-Read Cable (Sold Separately))
- 2 - AA 1.5 V Batteries
