Onset T-ASH-G2-500

Our Part No. TASHG2500

Mfr. Model T-ASH-G2-500

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Onset T-ASH-G2-500

Our Part No. TASHG2500

Mfr. Model T-ASH-G2-500

High-performance pressure transducer for industrial applications
1/4 inch NPT stainless-steel pressure connection
Measurement range: 500 psig

This product is available for shipping to the US, Canada, and Puerto Rico only.

$268.36

This item ships FREE

Key Features

High-performance pressure transducer for industrial applications
1/4 inch NPT stainless-steel pressure connection
Measurement range: 500 psig
Compensated temp range: -40° to 125°C (-40° to 257°F)
Accuracy: ±1% FS from -20° to 85°C (-4° to 185°F); ±1.5% FS -40° to -20°C and 85° to 125°C (-40° to -4°F and 185° to 257°F)
Non-linearity: less than ±0.1% of span typical
Non-repeatability: less than ±0.03% of span typical
Hysteresis: less than ±0.01 of span typical
Stability: less than ±0.25% of span/year
Durability: tested to 50 million cycles
Overpressure: 200% FS
Response time: less than 1 msec
Power: 9-36 VDC, 5mA
Operating temp range: -40° to 125°C (-40° to 257°F)
Operating humidity range: 0 to 100% RH, no effect
Output signal to FlexSmart module: 0-5 VDC, 3 wire
Insulation breakdown voltage: 100 VAC
Insulation resistance: greater than 100 megohms at 100 VDC
Construction: Shielded cable, 24 AWG, PVC jacket, 1-meter
Pressure connection: 1/4" NPT 304 stainless steel
Sensor material: 17-4PH stainless steel
Housing material: 20% glass reinforced nylon, fire retardant to UL94 V1
CE compliance: Per EN 61326: 1997 + A1: 1998 + A2: 2001, Annex A (Heavy Industrial)
Number of data channels: 1
Environments: For use for indoor environments
Measurements: Gauge Pressure

Details

The 200-psig Ashcroft Gauge Pressure Sensor provides precision pressure measurements in compressed air systems, water, or other compatible gases and fluids with an accuracy of ±1% FS from -20° to 85°C (-4° to 185°F) and only ±1.5% FS -40° to -20°C and 85° to 125°C (-40° to -4°F and 185° to 257°F).

Requires analog port selection during U30 system configuration and use of a S-FS-CVIA when using the H22-001 data logger. When using a U12 data logger, this sensor requires an 0-5 Vdc analog input cable (CABLE-ADAP5) and external power provided by an AC adapter (AC-SENS-1).

More Information