Onset T-DCI-F350-W5B3
Air Velocity and Temperature Remote Head Sensor for RX3000 Series, 0.5 to 10 m/s (100 to 2,000 fpm), 32°F to 140°F
TDCIF350W5B3
T-DCI-F350-W5B3
Onset T-DCI-F350-W5B3
Air Velocity and Temperature Remote Head Sensor for RX3000 Series, 0.5 to 10 m/s (100 to 2,000 fpm), 32°F to 140°F
TDCIF350W5B3
T-DCI-F350-W5B3
- Brand Name: Onset
- Condition: NEW
- Adds ability for users to be able to measure air velocity (in ducts, e.g.) from which CFM can be computed
- Operates in indoor environments
- Measurements: Air velocity
- Operating temperature range: 0°C to 60°C (32°F to 140°F)
- Velocity range: 0.5 to 10 m/s (100 to 2,000 fpm)
- Response time: 400ms
- Storage temperature: -40°C to 105°C (-40°F - 220°F)
- Relative humidity (non-condensing): 5-95%
- Supply power requirements: 4.5-15 VDC, 35mA nominal
- Velocity output: 0-5V
- Temperature output: 0-5V
- Housing construction: Polycarbonate (PC), UL94-V0 (head) UL94-HB (housing)
- Plenum rated cable: 22 AWG
- Environmental protection: IP65 electronics, including conformal coated sensing element
- Accuracy: 0.5 to 10 m/s (100 to 2,000 fpm): ± (4% of reading + 0.10 m/s [20 fpm])
- Stainless steel wand: 127mm (5 in.)
- Sensor head height: 64mm (.25 in.)
- Housing length: 196 mm (7.75 in.)
- Cable length from housing to sensor Head: 1m (3 ft.)
The Onset TDCIF350W5B3 Air Velocity and Temperature Remote Head Sensor for RX3000 Series, 0.5 to 10 m/s (100 to 2,000 fpm), 32°F to 140°F is a versatile, high performance, air velocity and air temperature sensor where the sensor element is built remotely from the sensor electronics. In products where segregation of the sensing element and electronics is desirable, such as products involving high EMI sensitivity or extreme temperature, or those where the sensing area is too small for typical probe-style sensors.
See relevant data loggers for details about compatability requirements.
Brand | Onset |
---|---|
Condition | NEW |