Onset T-WNB-3Y-208-P
2-/3-Branch WattNode Circuit kWh Transducer Sensor, 208 to 240 VAC
TWNB3Y208P
T-WNB-3Y-208-P
Onset T-WNB-3Y-208-P
2-/3-Branch WattNode Circuit kWh Transducer Sensor, 208 to 240 VAC
TWNB3Y208P
T-WNB-3Y-208-P
- Wye configuration ranges: 120, 208, 240 Volts AC - Neutral required
- 1 Phase 2 Wire 120V (with neutral)
- 1 Phase 3 Wire 120V/240V
- Wye configuration ranges: 120, 208, 240 Volts AC - Neutral required
- 1 Phase 2 Wire 120V (with neutral)
- 1 Phase 3 Wire 120V/240V
- 3 Phase 4 Wire 120V/208V
- Rating: FCC Class A
- Operating: voltage range: ±20% of nominal
- Frequency: 60 Hz
- CT input: 0-0.5 VAC operating, 3 VAC maximum
- Accuracy: ±0.45% of reading + 0.05% FS through 25th harmonic (dependent on CT used and line variation accuracy could be 1.5% to 4% of reading)
- Enclosure: High impact, UL rated ABS plastic
- Connectors: UL, cUL recognized, detachable screw terminals (14 AWG), 600V
- Operating temp range: -30 to 60°C (-22 to 140°F)
- Operating humidity range: 0 to 90% RH, non-condensing
- Number of data channels: 3
- Environments: For use in indoor environments
- Measurements: Kilowatt Hours (kWh)
The Onset T-WNB-3Y-208-P 2-/3-Branch WattNode Circuit kWh Transducer Sensor, 208 to 240 VAC sensor provides accurate kWh measurement for sub-metering, net-metering, energy management, and performance contracting applications.
This WattNode kWh Transducer works with Magnelab AC Current Transformers and a Pulse Input Adapter, or a HOBO Data Node pulse input port to provide True-RMS kilowatt hours of energy used, even for loads with non-sinusoidal waveforms. Because these sensors tie directly into the line, they should be used only by qualified personnel. This model supports up to 3 separate 120 VAC single-phase branch circuits or individual 120 VAC phases of a 3- phase wye-connection 208/240 VAC circuit.
Brand | Onset |
---|---|
Condition | NEW |
- 1 - 2-/3-Branch WattNode Circuit kWh Transducer Sensor, 208 to 240 VAC