Onset UX100-011A
HOBO Temperature and Relative Humidity Data Logger, 2.5% Accuracy
Onset UX100-011A
HOBO Temperature and Relative Humidity Data Logger, 2.5% Accuracy
The Onset UX100011A HOBO Temperature/2.5% Relative Humidity Data Logger features integrated sensors to measure and record temperature and relative humidity (within 2.5% accuracy) in indoor environments. Uses for the logger include monitoring occupant comfort in office buildings, tracking food storage conditions in warehouses, and measuring humidity levels in museums.
- Temp. Range: -4° - 158°F
- Relative Humidity Range: 1 - 95% (non-condensing)
- Easy-to view LCD display
- Large memory capacity
- Visual high and low alarm thresholds
- New Burst and Statistics logging modes
- User-replaceable Relative Humidity senso
- Operates in an indoor environment
- Measurements: Relative Humidity and Temperature
- Temperature Sensor:
- Range: -20° to 70°C (-4° to 158°F)
- Accuracy: ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F), see Plot A
- Resolution: 0.024°C at 25°C (0.04°F at 77°F); see Plot A
- Response time: 4 minutes in air moving 1 m/s (2.2 mph)
- Drift: <0.1°C (0.18°F) per year
- RH Sensor:
- Range: 1% to 95% (non-condensing)
- Accuracy: ±2.5% from 10% to 90% typical to a maximum of ±3.5% including hysteresis at 25°C (77°F); below 10% and above 90% ±5% typical
- Resolution: 0.01%
- Response time: 10 seconds to 90% in airflow of 1 m/s (2.2 mph)
- Drift: <1% per year typical
- Logger
- Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
- Launch/readout: 0° to 50°C (32° to 122°F) per USB specification
- Logging rate: 1 second to 18 hours, 12 minutes, 15 seconds
- Logging modes: Normal, Burst or Statistics
- Memory modes: Wrap when Full or Stop when Full
- Start modes: Immediately, Push Button, Date and Time or Next Interval
- Stop modes: When Memory Full, Push Button, or Date and Time
- Restart mode: Push Button
- Time accuracy: ±1 minute per month at 25°C (77°F), see Plot C
- Battery life: 1 year, typical with logging rate of 1 minute and sampling interval of 15 seconds or greater
- Battery type: One 3V CR2032 lithium battery
- Memory: 128 KB (63,488 measurements, maximum)
- Download type: USB 2.0 interface
- Full memory download time: 20 seconds
- LCD: Visible from: 0° to 50°C (32° to 122°F); LCD may react slowly or go blank in temperatures outside this range
- Size: 3.66 x 8.48 x 2.29 cm (1.44 x 3.34 x 0.9 in.)
- Requires USB cable (not included)
The Onset UX100011A HOBO Temperature and Relative Humidity Data Logger records temperature and relative humidity (within 2.5% accuracy) in indoor environments with its integrated sensors. Using HOBOware®, you can easily configure the logger alarm to trip for specific high or low sensor readings. Or, you can set up burst logging in which the UX100-011A records data at a different interval during certain conditions. The logger can also calculate minimum, maximum, average, and standard deviation statistics. This compact data logger has a built-in LCD screen to monitor the current temperature, relative humidity, logging status, battery use, and memory consumption in between readouts.
Country of Origin | United States |
---|---|
Brand | Onset |
Condition | NEW |
Vendor Alias | UX100-011A |
- 1 - Command™ Strip
- 1 - Double-sided Tape
- 1 - Hook amd Loop Strap