Onset UX120-014M

HOBO 4-Channel Thermocouple Temperature Data Logger

UX120014M
UX120-014M

Onset UX120-014M

HOBO 4-Channel Thermocouple Temperature Data Logger

UX120014M
UX120-014M

The Onset UX120014M HOBO 4-Channel Thermocouple Temperature Data Logger is a four-channel thermocouple data logger with a LCD display and ability to measure and record temperature in a broad range of monitoring applications. Up to four J, K, T, E, R, S, B, or N type probes (sold separately) can be accepted by this logger.

  • Near real-time readout of current temperatures/minimum/maximum/average/standard deviation statistics
  • Start/stop/restart push buttons
This product is available for shipping to the US, Canada, and Puerto Rico only.
$335.00
This item ships FREE
  • NOTE: This product requires HOBOware software (USB interface cable included with BHW-PRO-CD purchase, ONLY)
  • Easy-to-view LCD display confirms logger operation and battery status
  • Near real-time readout of current temperatures as well as minimum, maximum, average and standard deviation statistics
  • On-screen alarms notify you if temperatures exceed high or low thresholds
  • Large memory capacity capable of storing 1.6 million measurements
  • Start, stop, and restart pushbuttons
  • User upgradeable firmware
  • Optional protective case enables logger use in outdoor environments (not included)
  • Compatible with HOBOware and HOBOware Pro software for logger setup, graphing and analysis
  • Thermocouple:
  • Type/Range/Accuracy/Resolution:
  • J/-210° to 760°C (-346° to 1,400°F)/±0.6°C (±1.08°F) ± thermocouple probe accuracy/0.03°C (0.06°F)
  • K/-260° to 1,370°C (-436° to 2,498°F)/±0.7°C (±1.26°F) ± thermocouple probe accuracy/0.04°C (0.07°F)
  • T/-260° to 400°C (-436° to 752°F)/±0.6°C (±1.08°F) ± thermocouple probe accuracy/0.02°C (0.03°F)
  • E/-260° to 950°C (-436° to 1,742°F)/±0.6°C (±1.08°F) ± thermocouple probe accuracy/0.03°C at (0.05°F)
  • R/-50° to 1,550°C (-58° to 2,822°F)/±2.2°C (±3.96°F) ± thermocouple probe accuracy/0.08°C (0.15°F)
  • S/-50° to 1,720°C (-58° to 3,128°F)/±2.2°C (±3.96°F) ± thermocouple probe accuracy/0.08°C (0.15°F)
  • B/550° to 1,820°C (1,022° to 3,308°F)/±2.5°C (±4.5°F) ± thermocouple probe accuracy/0.1°C (0.18F)
  • N/-260° to 1,300°C (-436° to 2,372°F)/±1.0°C (±1.8°F) ± thermocouple probe accuracy/0.06°C (0.11°F)
  • Internal 10K Thermistor (Temperature):
  • Range: Logging: -20° to 70°C (-4° to 158°F)
  • Acuracy: ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F)
  • Resolution: 0.024°C at 25°C (0.04°F at 77°F)
  • Drift: <0.1°C (0.18°F) per year
  • Logger:
  • Logger Operating Range: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing); logger accuracy from 0° to 50°C (32° to 122°F)
  • Launch/readout: 0° to 50°C (32° to 122°F) per USB specification
  • Logging rate: 1 second to 18 hours, 12 minutes, 15 seconds
  • Logging modes: Normal, Burst or Statistics
  • Memory modes: Wrap when Full or Stop when Full
  • Start modes: Immediately, Push Button, Date & Time or Next Interval
  • Stop modes: When Memory Full, Push Button, or Date & Time
  • Restart mode: Push Button
  • Time accuracy: ±1 minute per month at 25°C (77°F)
  • Battery life: 1 year, typical with logging rate of 1 minute and sampling interval of 15 seconds or greater
  • Battery type: Two AAA 1.5V alkaline batteries, user replaceable
  • Memory: 4 MB (1.6 million measurements, maximum)
  • Download type: USB 2.0 interface
  • Full memory download time: Approximately 1.5 minutes
  • LCD: LCD is visible from: 0° to 50°C (32° to 122°F); LCD may react slowly or go blank in temperatures outside this range
  • Environmental rating: IP50
  • Environments: For use in indoor environments
  • Measurements: Temperature

The Onset UX120-014M HOBO 4-Channel Thermocouple Temperature Data Logger is a four-channel LCD data logger for measuring and recording temperature in a broad range of monitoring applications. The data logger makes it easy and convenient to record temperatures over a broad range (-260 to 1820⁰ C) and can accept up to four J, K, T, E, R, S, B, or N type probes.

In addition to accepting four thermocouple probes, the data logger features an internal temperature sensor for logging ambient temperatures, further extending the range of application possibilities.

Note: UX120-014M requires the HOBOware software (free to download) to operate. Please also note that a USB interface cable comes with the purchase of a HOBOware Pro CD (BHW-PRO-CD), only.

More Information
Country of OriginUnited States
BrandOnset
ConditionNEW
Vendor AliasUX120-014M
  • 1 - HOBO 4-Channel Thermocouple Temperature Data Logger
  • 1 - Command strip
  • 1 - Double-sided tape
  • 1 - Hook and loop strap
  • 2 - AAA 1.5 V alkaline batteries