Onset W-DO
Dissolved Oxygen and Temperature Sensor for MX800 Series
The Onset W-DO dissolved oxygen sensor is an interchangeable sensor that works with HOBO MX800 Series Water Loggers (Sold Separately) to measure dissolved oxygen and temperature.
- User-replaceable DO cap lasts 2 years or more
- High accuracy measurements, even without calibration
- Get salinity-adjusted DO directly when used with conductivity sensor (W-CT or W-CTD), no need for post-processing
- User-replaceable DO cap lasts 2 years or more
- High accuracy measurements, even without calibration
- Get salinity-adjusted DO directly when used with conductivity sensor (W-CT or W-CTD), no need for post-processing
- Direct DO percent saturation data, no need for post-processing (when used with MX802)
- Easy calibration with included calibration boot – saves time
- 1" diameter for use in narrow wells (with cable to MX802 above the well)
- PVC housing holds up in saltwater
The Onset W-DO dissolved oxygen sensor is an interchangeable sensor that works with HOBO MX800 Series Water Loggers to measure dissolved oxygen and temperature.
The DO sensor can be attached directly to the fully submersible MX801 model, or attached via cable to the direct read MX802 model, which doesn't require having to pull the sensor out of the water to download data.
When this sensor is connected to a HOBO MX800 logger that also has a conductivity or CTD sensor attached, the logger can record salinity-adjusted DO directly. With this sensor attached to the HOBO MX802 direct read model, the logger can calculate DO percent saturation directly. When used with fully submersible HOBO MX801 model, a barometric logger data file (from either an MX802 or MX2001 logger) is needed to calculate DO percent saturation, for post-processing in the HOBOconnect app. In waters with changing salinity, the logger must also have a salinity sensor attached or you will need an MX800 salinity data file to get DO percent saturation.
Brand | Onset |
---|---|
Condition | NEW |
- 1 - Dissolved Oxygen Sensor (W-DO)
- 1 - Dissolved Oxygen Sensor cap (RDO-CAP-1)
- 1 - Calibration Boot and Sponge