Phase II UTG-2800
Ultrasonic Thickness Gauge with Scan, Min/Max Setting and USB Output
UTG2800
UTG-2800
Phase II UTG-2800
Ultrasonic Thickness Gauge with Scan, Min/Max Setting and USB Output
UTG2800
UTG-2800
The Phase II UTG-2800 Ultrasonic Thickness Gauge with Scan/Min/Max Setting/USB Output offers basic measurement, scanning capabilities, adjustable sound velocity, extended memory, and USB output capabilities. Both metallic and non-metallic materials such as steel, aluminum, and plastic can be measured.
- Measuring Range: 0.040" to 12" in steel with standard probe
- Sound Velocity Range: 3280 to 32805 ft./s
- Accuracy: +/- (0.5% thickness + .001")
- Display type: 4-digit LCD w/ backlight
- Minimum display unit: 0.001 in./0.01mm (selectable)
- Measuring range: 0.040 in. to 12.0 in. in steel w/standard probe
- Accuracy: +/- (0.5% thickness + .001 in.)
- Sound velocity range: 3280 ft./s to 32805 ft./s (1000-9999m/s)
- Upper/Lower limit preset alarm: Yes
- Operating temperature: 32 °F to 122 °F
- Frequency: 5 MHz
- Update range: 4 Hz
- Memory: 20 Groups (100 files/group)
- Output: USB
- Mini-Printer: Optional
- Power supply: Two 3V AA alkaline batteries
- Battery life: Approx. 100 hours (w/backlight off)
- Power consumption: Working current is less than 3V
- Multi-functional unit offers basic measurement, Scanning Capabilities, Adjustable Sound Velocity, extended memory and USB output capabilities
- Designed to measure thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any ultrasonic wave conductor that has parallel top and bottom surfaces
- Accurately displays readings in either inch or millimeter after simple calibration to known thickness or sound velocity
The Phase II UTG2800 Ultrasonic Thickness Gauge with Scan, Min/Max Setting and USB Output is packed with features typically found on high-end models. The UTG-2800 offers everything from basic measurement, Scanning Capabilities, Adjustable Sound Velocity, extended memory and USB output capabilities.
With its dynamic ultrasonic thickness gauge, the Phase II UTG-2800 is designed to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good, ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The UTG-2800 accurately displays readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.
| Vendor Alias | UTG-2800 |
|---|---|
| Brand | Phase II |
| Condition | NEW |
- 1 - 5 Mhz Dual Sensor Probe
- 1 - Certificate of Calibration
- 1 - Custom Carrying Case
- 1 - User Manual
