Practical Instrument 434
High Accuracy Milliamp Loop Diagnostic Calibrator
434PIECAL
434
434
Practical Instrument 434
High Accuracy Milliamp Loop Diagnostic Calibrator
434PIECAL
434
434
The PIECAL 434 High Accuracy Milliamp Loop Diagnostic Calibrator is designed to find hidden loop problems and calibrate with lab accuracy. This unit provides an automatic indication of loop current and leakage current along with the ability to measure ground current leakage from faulty wiring, flooded conduit, and corrosion bridges.
- Source Range: 0 to 24mA/-25 to 125% of 4 to 20mA
- Read Range: 0 to 24mA/-60 to 60VDC
- Accuracy: ±0.01% of Reading + 0.002mA
- Calibrate milliamp instruments
- Source 0.000 to 24.000 mA & -25.00 to 125.00% of 4-20 mA
- Read 0.000 to 52.000 mA, -99.99 to 99.99 V
- Simulate 2-wire transmitters
- Power & read 2-wire transmitters
- Menu selectable 250 W resistor for HART compatibility
- Calibrate with confidence
- Accurate to ±0.025% of span at 4.000 & 20.000 EZ-CHECK outputs
- Easy-to-read display
- Turn on the backlight to read in dark areas of the plant
- Locate loop current leakages
- Automatic indication of loop current and leakage current. Measure ground current leakage from faulty wiring, flooded conduit and corrosion bridges. Leakage appears as a zero shift and helps you decide if the transmitter needs calibration or if there is some problem in the loop wiring.
- Faster calibrations
- Instantly select three outputs with EZ-CHECK switch and easily find trip points with two speed EZ-DIAL plus automatic stepping & ramping
- Functional replacement for the Altek 434
The Practical Instrument Electronics (PIE) PIECAL 434 is an Automated 4-20mA Loop Calibrator with Loop Diagnostics.
| Country of Origin | United States |
|---|---|
| Brand | PIE |
| Catalog | 434 |
| Condition | NEW |
| Vendor Alias | PIE 434 |
- 1 - Set of Test Leads
- 1 - Rubber Boot
- 1 - NIST Traceable Calibration Certificate
Customers Also Bought
