PowerSight 15KVP
15k Voltage Probe for Power Analyzers
15KVP
15KVP
PowerSight 15KVP
15k Voltage Probe for Power Analyzers
15KVP
15KVP
- Connect directly to 3-phase 15KV
- Allows bypassing PTs (Potential Transformers)
- Shepherd’s hook for easy connection to medium voltage (1.4 inch inside diameter)
- Connect directly to 3-phase 15KV
- Allows bypassing PTs (Potential Transformers)
- Shepherd's hook for easy connection to medium voltage (1.4 inch inside diameter)
- Shepherd's hooks may be unscrewed and replaced by alternative safe attachment method
- All connections are labeled and advisory labels are attached, for review each time the probes are used
- Measure harmonics up to 900 Hz
- For use exclusively with PowerSight line of Energy Analyzers
PowerSight's 15KVP voltage probes are capable of connecting directly to 3 phase voltages up to 15 kilovolts.
Normally, professionals who wish to measure 12,470 volt lines need to locate an installed PT (potential transformer) and then connect to the low voltage output secondary of the PT. The PT ratio is entered into the PowerSight so that primary values are displayed. However, sometimes a convenient PT is not available or the measurement must bypass the PT to verify whether the metering circuit is correct.
The 15KVP allows direct connection between the primary voltage and to your PowerSight analyzer.
The connection to the medium voltage is via a shepherd's hook that has a 1.4 inch inside diameter.
Whenever possible, connect the probes to a de-energized circuit. First, connect the ground lead of each of the probes to a secure ground point.
| Brand | PowerSight |
|---|---|
| Condition | NEW |
