PowerSight 15KVPSET
15K Voltage Probe Set with Hot Sticks, 3-Pack
- Includes three 15kv voltage probes
- Connect directly to 3-phase 15KV
- Allows bypassing PTs (Potential Transformers)
- Includes three 15kv voltage probes
- Connect directly to 3-phase 15KV
- Allows bypassing PTs (Potential Transformers)
- Shepherd's hook for easy connection to medium voltage (1.4 inch inside diameter)
- Shepherd's hooks may be unscrewed and replaced by alternative safe attachment method
- All connections are labeled and advisory labels are attached, for review each time the probes are used
- Measure harmonics up to 900 Hz
- For use exclusively with PowerSight line of Energy Analyzers
The PowerSight 15KVPSet is a 3-pack of 15kv voltage probes that are capable of connecting directly to 15 kilovolts. Normally, professionals who wish to measure 12,470 volt lines need to locate an installed PT (potential transformer) and then connect to the low voltage output secondary of the PT. The PT ratio is entered into the PowerSight so that primary values are displayed. However, sometimes a convenient PT is not available or the measurement must bypass the PT to verify whether the metering circuit is correct.
The 15KVPSet allows direct connection between the primary voltage and to your PowerSight analyzer. The set comes disassembled in its own compact canvas carrying case.
Simply screw the "hot stick" sections together and then onto the probe. Connect the outputs to your PowerSight analyzer and to ground. Enter a 60:1 input ratio into your PowerSight analyzer and then hook the probes onto the medium voltage, keeping a safe distance with the hot sticks.
The connection to the medium voltage is via a shepherd's hook that has a 1.4 inch inside diameter.
Whenever possible, connect the probes to a de-energized circuit. First, connect the ground lead of each of the probes to a secure ground point.
Brand | PowerSight |
---|---|
Condition | NEW |
- 3 - 15kv voltage probes
- 1 - Compact canvas carrying case