PROMAX DT-302
Dual DVB-S/S2 Receiver with CAM and ASI-TS Output
DT302
DT-302
PROMAX DT-302
Dual DVB-S/S2 Receiver with CAM and ASI-TS Output
DT302
DT-302
The PROMAX DT-302 Dual DVB-S/S2 Receiver with CAM and ASI-TS Output is able to receive a satellite transponder and deliver the transport stream in the form of TS-ASI. The two identical TS-ASI outputs allows for this unit to allocate a higher number of services than DVB-T multiplexes. A Conditional Access Module (CAM) is able to be inserted into this unit.
- DVB-S/S2 IF Input: 2 independent DVB-S/S2 inputs
- TS Output: 2 double independent DVB-ASI outputs
- Minimal configuration required
- Configured and controlled by DT-800 module (not included)
- FI input (DVB-S/S2):
- Type: 2 independent DVB-S/S2 FI inputs
- Connector: 75 Ohm Type-F, Female
- Range frequency: 950 MHz to 2150 MHz
- Input level: 40 dBuV to 110 dBuV
- Information: MER of the signal
- LNB power supply:
- Voltage: OFF, 13 V and 18 V (+/- 1 V)
- Current: < 400 mA
- 22 kHz signal: ON, OFF
- Voltage: 0.65V +/-0.35V
- Frequency: 22 kHz +/- 4 kHz
- DVB-S receiver parameters:
- Symbol rate: 2 Mbauds to 45 Mbauds
- Roll off: 0.35
- Code rate: Automatic (1/2, 2/3, 3/4, 5/6, 7/8)
- Spectral inversion: Automatic (ON, OFF)
- DVB-S2 receiver parameters:
- Constellation: QPSK, 8PSK (Auto)
- Symbol rate (QPSK): 2 Mbauds to 33 Mbauds
- Symbol rate (8PSK): 2 Mbauds to 30 Mbauds
- Roll-off factor: Automatic (0.20 , 0.25 and 0.35)
- Code rate (QPSK): Automatic (1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 )
- Code rate (8PSK): Automatic (3/5, 2/3, 3/4, 5/6, 8/9, 9/10)
- Spectral inversion: Automatic (ON, OFF)
- Decrypting multiples services:
- Interface: 2 independent Common Interfaces
- Maximum number of decrypted services: Depending on the CAM module you use (see DT-902)
- Configuration: Through DT-800 Control Module in local or remote mode (PC) (See DT-800 specifications)
- Transport stream process:
- Basic functions: Simultaneous decryption of multiples services (using a proper CAM module) (See DT-902); selection of decrypted services by name
- Advanced functions (only available when connecting to DT-1XX modulator): Selection of Services by name or streams filtering by PID; Automatic Regeneration of PAT and SDT tables; Distribution of TS services among various output multiplexes; Adaptation of the NIT table:
- NID (Network Identifier) editable
- Management of LCN (Logic Channel Number) for each module and each service
- TS output:
- Type: 2 independent DVB-ASI double outputs
- Connector: BNC female, 75 Ohm
- Packets: TS Packets of 204 bytes length
- Power supply: Via the DT-800 Control and Power module
- Connector: JST B08P-XL-HDS (connecting cable supplied with DT-800)
- Voltage and highest consumption: +12 V < 0.55 A; +5 V < 1.4 A
- Assembling: DT-900 framework for rack or wall (not included)
The PROMAX DT302 Dual DVB-S/S2 Receiver with CAM and ASI-TS Output are digital satellite receivers compatible with DVB-S and DVB-S2 standards. They can receive a satellite transponder and deliver the transport stream in the form of TS-ASI.
Each satellite receiver has two identical TS-ASI outputs. This is because satellite transponders can typically allocate a higher number of services than DVB-T mutiplexes and therefore more than one COFDM modulator may be required if we want to deliver all services of the transponder to the TV distribution system. Each satellite receiver also allows inserting a Conditional Access Module (CAM). Several types of CAM can be used for de-encrypting one or more of the available encrypted programmes and being distributed (see DT 902).
| Brand | PROMAX |
|---|---|
| Condition | NEW |
| Vendor Alias | DT-302 |
- 1 - BNC/BNC Cable 25 cm
- 1 - BNC/BNC Cable 50 cm
- 1 - User Manual
