PROMAX FA-405
Single-Output Programmable DC Power Supply, 40V/5A
FA405
FA-405
PROMAX FA-405
Single-Output Programmable DC Power Supply, 40V/5A
FA405
FA-405
The PROMAX FA-405 Single-Output Programmable DC Power Supply (40V/5A) provides continuous output and features over-voltage, over-current, over-power, and over-temperature protections for user safety. The rotary knob along with the buttons allow for the user to program incremental changes.
- DC Voltage Output: 0 to 40V
- Current Output: 0 to 5A
- Voltage Regulation: ≤ 10 mV (load), ≤ 0.05% (line)
- Current Regulation: ≤ 5 mA (load), ≤ 0.05% (line)
- Output voltage: DC 0 to 40 V
- Output current: 0 to 5 A
- Voltage regulation:
- Voltage load regulation: ≤10 mV
- Voltage line regulation: ≤ 0.05%
- Current regulation:
- Current load regulation: ≤ 5 mA
- Current line regulation: ≤ 0.05%
- Ripple:
- Voltage (mV effective value): ≤ 20 mV
- Current (mV effective value): ≤ 10 mA
- Resolution of programming and measurement:
- Voltage: 10 mV
- Current: 2 mA
- Accuracy of programming and measurement:
- Voltage: +/- 0.05 % reading + 3 digits
- Current: +/- 0.1% reading + 5 digits
- Incremental control: Programmable from 0 to +/- 50%
- Protections: OVP/OCP/OPP/OTP
- LCD display with backlighting: Simultaneous presentation of current/limits, voltage, power and current; as well as
- exit-locking conditions and remote control
- Remote control: RS-232C standard
- Additional security: Exit key ON/OFF; blocking controls key
- Power supply AC 115 V/230 V +/- 15%, 50/60 Hz
- Consumption: Up to 420 W
The PROMAX FA405 Single-Output Programmable DC Power Supply, 40V/5A provides a continuous output. It is adjustable from 0 to 40 V and from 0 to 5 A. The control of the power supply is totally digital. It has a large illuminated LCD display that makes it accurate and comfortable when setting the output conditions. It also has an output disconnection button to avoid breaking down the device by a programming mistake when user is changing adjustments. The power supply has OVP (over-voltage) protections, OCP (over-current) protections, OPP (overpower) protections and OTP (over-temperature) protections. They provide a safety work environment for users. A special button allows blocking controls for greater safety and it prevents settings from unintentional changes.
During the design of the FA-405 it has been taken into account some careful considerations about safety without sacrificing the easy way of use. The incorporation of a rotary knob as well as the buttons to program incremental changes (in percentage) provide a way of use really easy, which is uncommon in programmable power supplies. The use of switched technology provides a high power efficiency and a very good weight/power ratio. It has a RS-232C interface for remote programming by means of a PC.
| Brand | PROMAX |
|---|---|
| Condition | NEW |
| Vendor Alias | FA-405 |
- 1 - Power Cord
- 1 - User Manual
