Ralston Instruments DCAP-300PSIG-FL
650 psi (45 bar) Pneumatic Scissor Hand Pump with 300 psi FieldLab Digital Pressure Calibrator, 3 ft. Hose
DCAP300PSIGFL
DCAP-300PSIG-FL
Ralston Instruments DCAP-300PSIG-FL
650 psi (45 bar) Pneumatic Scissor Hand Pump with 300 psi FieldLab Digital Pressure Calibrator, 3 ft. Hose
DCAP300PSIGFL
DCAP-300PSIG-FL
- Hand Pump: DCAP Pneumatic Hand Pump
- Maximum Pressure: 650 PSI 45 bar / 4.50 MPa
- Pressure Reference: Pressure FieldLab, 300 psi (20 bar / 2 MPa), Female Quick-test bottom connection
- Hand Pump: DCAP Pneumatic Hand Pump
- Maximum Pressure: 650 PSI 45 bar / 4.50 MPa
- Pressure Reference: Pressure FieldLab, 300 psi (20 bar / 2 MPa), Female Quick-test bottom connection
- Process Connection: 1/4" male NPT x male Quick-test, stainless steel, no check-valve
- Hose: Quick-test 6900 psi hose with stainless steel hose ends, 3 ft long
- Ideal for use in the field for doing pressure calibration, testing, and custody transfer
- Easily changes from pressure to vacuum with a knob
- Two outlet ports allow user to attach pump to both device under test and external pressure reference, eliminating a tee
- Fine adjustment piston allows user to achieve exact pressure for cardinal point pressure calibrations
- Generates vacuum without spring force, making the spring easier to compress
- Equipped with precision pressure vent with soft seated bleed valve
- Hose, gauge adapter and process connection can be attached to pump without thread sealant or wrench
- Rugged, all metal construction improves temperature and pressure stability
FieldLab Digital Pressure Calibrator Features:
- Maximum Pressure: 300 psi / 20 bar / 2 MPa
- Process Connection: Female Quick-test bottom connection
- Provides single button logging of both Device Under Test (DUT) and Reference readings
- Certified Intrinsically Safe for hazardous locations anywhere in the world
- Monitors pressure over short or very long periods of time at customized intervals
- Onboard storage supports two million data points
- Includes all standard engineering units for pressure or vacuum
- Units can be instantly swapped without searching through menus
The Ralston DCAP-300PSIG-FL 650 psi (45 bar) Pneumatic Hand Pump with 300 psi FieldLab Digital Pressure Calibrator features a rugged metal construction with two outlet ports for connections, a fine adjust piston, and a precision pressure vent. It is an exceptionally durable hand pump for use in the field for such applications as pressure calibration, testing and custody transfer. The rugged, all metal construction improves temperature and pressure stability. Two outlet ports allow the user to attach the pump to both the device under test and an external pressure reference, thus eliminating a tee. The fine adjustment piston allows the user to achieve an exact pressure for cardinal point pressure calibrations. Users can also pneumatic field calibrations on pressure transmitters, switches or gauges using an external pressure calibrator as the reference.
The included the 300 psi FieldLab Digital Pressure Calibrator provides single button logging of both Device Under Test (DUT) and Reference readings. The FieldLab is certified Intrinsically Safe for hazardous locations anywhere in the world. For general purpose data logging, the FieldLab can monitor pressure over short or very long periods of time at customized intervals. The FieldLab comes with every standard engineering unit used to measure pressure or vacuum. Swap units instantly without searching through menus.
| Brand | Ralston |
|---|---|
| Condition | NEW |
| Vendor Alias | DCAP-300PSIG-FL |
- 1 - Pneumatic Hand Pump (DCAP)
- 1 - Pressure FieldLab, 300 psi, Female Quick-test Connection (FLP1-GL-QF)
- 1 - 1/4" Male NPT x Male Quick-test Process Connection, no check-valve, S.S. (QTHA-2MS0)
- 1 - Quick-test 6900 psi Hose, S.S. hose ends, 3 ft long (QSQS-HOS-3ft)
- 1 - FieldLab AC Power Charger Kit (DGAU-0163)
- 1 - USB cable, Straight A x Right Angle B, shielded, 2 m long (DGAU-0191)
- 1 - FieldLab Carrying Case (DGAU-0370)
Customers Also Bought
