Ralston Instruments DPPV-KIT6-VJ
Pressure and Vacuum Hand Pump Calibration Kit with LC20 Pressure Gauge, -15 to 100 PSI
DPPVKIT6VJ
DPPV-KIT6-VJ
Ralston Instruments DPPV-KIT6-VJ
Pressure and Vacuum Hand Pump Calibration Kit with LC20 Pressure Gauge, -15 to 100 PSI
DPPVKIT6VJ
DPPV-KIT6-VJ
The Ralston Instruments DPPV-KIT6-VJ Pressure and Vacuum Pump Pneumatic Kit provides users with what they need to perform accurate calibrations.
- Pneumatic/Vacuum Hand Pump: 650 PSI Max Pressure, -28.5 inHg Max Vacuum, 0°F to 140°F Operating Temperature Range
- Quick-Test Hose: 6900 Max Pressure, -30 inHg Max Vacuum, -40°F to 140°F Operating Temperature Range
- LC20 Pressure Gauge: 15 PSI (Sensor A Bottom), -4°F to 122°F Operating Temperature Range
Hand Pump (DPPV)
- Piston Displacement: 1.25 cubic in.
- Maximum Pressure: 125 PSI / 8.6 bar / 860 kPa
- Maximum Vacuum: -23 inHg / -77.9 kPa
- Minimum Operating Temperature: 0°F
- Maximum Operating Temperature: 130°F
- Pressure Media: Air
- Burst Pressure:1000 PSI / 70 bar / 7.00 MPa
- Materials: Anodized Aluminum, Brass, Stainless Steel
- Media Compatibility: Air, Inert Gas, Natural Gas
- Outlet Port: Male Quick-Test, Male Quick-Test with Cap and Chain
- Seal Materials: Buna-N, Delrin
- Fine Adjustment Resolution: 0.01 PSI / 70 Pa
Pressure Reference (LC20-GC2M-00-00)
- Battery Count: 2
- Battery Life: 1000 Hours
- Battery Type: AA Alkaline (IEC-LR6)
- Bluetooth Radio Installed: No
- Calibration Certificate: ISO 17025:2017 Accredited
- Certifications: Certified to CSA Standard C22.2 No. 61010-1, Complies with Pressure Equipment Directive 2014/68/EU, Complies with Low Voltage Directive 2014/35/EU, Complies with Electromagnetic Compatibility Directive 2014/30/EU
- Datalogging: PC Based (via USB)
- Electrical Rating: 50 mA at 5 VDC
- Ingress Protection: IP67 (1 meter water submersion for 30 minutes)
- LCD Display: 2.4 in. Segmented LCD Display
- Materials: ABS / Polycarbonate Blend, Powder Coated Aluminum
- Maximum Operating Temperature: 122°F
- Minimum Operating Temperature: -4°F
- Panel Mount: No
- Primary Power: Battery Power
- Process Connection: 1/4 in. Male NPT (ASME B1.20.1)
- Process Connection Location: Bottom Mount
- Protection Class: Pollution Degree 2 (UL / IEC 61010-1)
- Temperature Compensation: None
- USB Connection: USB (Micro B)
- W1 Radio Installed: No
- Wetted Materials: 316 Stainless Steel
- Wireless: None
- End 1 Connector: 1/4 in. Male NPT (ASME B1.20.1)
- End 1 Direction: Left
Sensor A (Bottom)
- Max Vacuum: 30 inHg / 101.6 kPa
- Measurement Type: Gauge Pressure, Gauge Vacuum
- Accuracy - Pressure Measurement: +/- 0.1% of Full Scale (ASME B40.100 Grade 4A/ISO Class 0.1)
- Media Compatibility: Air, Alcohol, Antifreeze, Ethylene Glycol, Hydraulic Oil, Inert Gas, Light Motor Oil, Mineral Oil, Natural Gas, Petroleum Based Oil, Ralston Calibration Oil, Skydrol, Transmission Fluid, Water, Windshield Washer Fluid, Oxygen (If Oxygen Cleaned)
- Engineering Units: atm, bar, cmH2O at 39.2°F, inH2O at 102.2°F, kPa, mbar, PSI, inHg at 39°F, kgf / cm^2, mmHg at 32°F, Torr, mmH2O at 39.2°C, ft.,H2O at 39°F, cmHg at 32°F, oz / in^2
- Wrench Size: 7/8 in.
- Sensor Type: Pressure Sensor
- Maximum Storage Temperature: 167°F
- Minimum Storage Temperature: -40°F
- Maximum Pressure: 15 PSI / 1 bar / 100 kPa
- Wetted Materials: 316 Stainless Steel
- Maximum Operating Temperature: 122°F
- Minimum Operating Temperature: -4°F
- Process Connection: 1/4 in. Male NPT
Reference Connection (QTHA-2FBA)
- Materials: Brass
- Maximum Operating Temperature: 225°F
- Maximum Pressure: 5000 PSI / 350 bar / 35 MPa
- Maximum Vacuum: 0 inHg / 0.0 kPa
- Wrench Size: 3/4 in.
- End 1 Connector: 1/4 in. Female NPT (ASME B1.20.1)
- End 1 Direction: Left
- End 2 Connector: Female Quick-Test
- End 2 Direction: Left
Hose (QTQT-HOS-3ft)
- Burst Pressure: 27000 PSI / 1860 bar / 185 MPa
- Color: Silver
- Fluid Media: Air, Inert Gas, Natural Gas, Petroleum Based Oil, Water
- Hose Length: 3 ft.
- Inner Diameter: 0.08 in.
- Materials: Brass
- Maximum Operating Temperature: 140°F
- Minimum Operating Temperature: -40°F
- Maximum Pressure: 6900 PSI / 475 bar / 48 MPa
- Maximum Vacuum: -30 inHg / -101.6 kPa
- Media Compatibility: Air, Inert Gas, Natural Gas, Petroleum Based Oil, Water
- Minimum Bend Radius: 1 in.
- Outer Diameter: 0.2 in.
- Type: QT
- Hose End 1: Female Quick-Test, Brass
- Hose End 2: Female Quick-Test, Brass
Process Connection (QTHA-2MBO)
- Burst Pressure: 20000 PSI / 1380 bar / 140 MPa
- Materials: Brass
- Maximum Operating Temperature: 225°F
- Minimum Operating Temperature: 0°F
- Maximum Pressure: 5000 PSI / 350 bar / 35 MPa
- Maximum Vacuum: 0 inHg / 0.0 kPa
- Seal Materials: Buna-N
- Wrench Size: 9/16 in.
- End 1 Connector: 1/4 in. Male NPT (ASME B1.20.1)
The Ralston Instruments DPPV-KIT6-VJ Pressure and Vacuum Pump Pneumatic Kit provides users with everything that they need to perform precise and accurate calibrations. A pneumatic hand pump allows users to control pressure levels by hand when in the field. This kit provides users with a LC20 pressure reference that measures and displays readings on a large, backlit screen with a pressure range of +/- 15 PSI. Users are also provided with a 3 ft. Quick-Test hose that has a maximum pressure of 6900 PSI. The Ralston Instruments DPPV-KIT6-VJ features a carrying case and accessories that users will need while in the field.
| Brand | Ralston |
|---|---|
| Condition | NEW |
- 1 - Pneumatic Pressure and Vacuum Hand Pump (DPPV)
- 1 - Digital Pressure Gauge (LC20-GC2M-00-00)
- 1 - 1/4 in. Female NPT x Female Quick-Test Reference Connection (QTHA-2FBA)
- 1 - 3 ft. Quick-Test Hose (QTQT-HOS-3ft)
- 1 - 1/4 in. Male NPT x Male Quick-Test Process Connection (QTHA-2MBO)
- 1 - USB-A to Micro USB-B Cable (D-000040)
- 1 - ISO 17025:2017 Accredited Calibration Certificate for LC10/LC20/LC30 (SERV-0026)
