Ralston Instruments XTHP-EP-KIT3-GV
Hydraulic Pump Calibration Kit with LC20 Gauge, 10,000 PSI
XTHPEPKIT3GV
XTHP-EP-KIT3-GV
Ralston Instruments XTHP-EP-KIT3-GV
Hydraulic Pump Calibration Kit with LC20 Gauge, 10,000 PSI
XTHPEPKIT3GV
XTHP-EP-KIT3-GV
The Ralston Instruments XTHP-EP-KIT3-GV Hydraulic Hand Pump Calibration Kit provides users with everything they need to make precise calibrations.
- Hydraulic Pump: 10,000 PSI Max Pressure, 0°F to 140°F Operating Temperature Range
- Quick-Test Hose: 10,000 Max Pressure, -30 inHg Max Vacuum, -40°F to 140°F Operating Temperature Range
- Includes Process/Reference Connection, Zippered Bag, and Carrying Case
Hand Pump (XTHP-EP)
- Materials: Anodized Aluminum, Stainless Steel, Delrin, Polysulfone
- Maximum Pressure: 10000 PSI / 700 bar / 70 MPa
- Media Compatibility: Alcohol, Antifreeze, Ethylene Glycol, Hydraulic Oil, Mineral Oil, Petroleum Based Oil, Windshield Washer Fluid, Transmission Fluid, Light Motor Oil, Ralston Calibration Oil
- Seal Materials: Teflon, EPDM
- Outlet Port: Male Quick-Test XT, Male Quick-Test XT with Cap and Chain
- Pressure Media: Liquid
- Burst Pressure: 40000 PSI / 2760 bar / 275 MPa
- Reservoir Volume: 4.2 fl. oz
- Maximum Operating Temperature: 140°F
- Minimum Operating Temperature: -15°F
- Fine Adjustment Resolution: 0.01 psi / 70 Pa
Pressure Reference (LC20-GV2M-00-00)
- Battery Count: 2
- Battery Life: 1000 Hours
- Battery Type: AA Alkaline (IEC-LR6)
- Bluetooth Radio Installed: No
- Calibration Certificate: ISO 17025:2017 Accredited
- Certifications: Certified to CSA Standard C22.2 No. 61010-1, Complies with Pressure Equipment Directive 2014/68/EU, Complies with Low Voltage Directive 2014/35/EU, Complies with Electromagnetic Compatibility Directive 2014/30/EU
- Datalogging: PC based (via USB)
- Electrical Rating: 50 mA at 5 VDC
- Ingress Protection: IP67 (1 meter water submersion for 30 minutes)
- LCD Display: 2.4 in segmented LCD Display
- Materials: ABS / Polycarbonate Blend, Powder Coated Aluminum
- Maximum Operating Temperature: 122°F
- Minimum Operating Temperature: -4°F
- Panel Mount: No
- Primary Power: Battery Power
- Process Connection: 1/4 in. Male NPT (ASME B1.20.1)
- Process Connection Location: Bottom Mount
- Protection Class: Pollution Degree 2 (UL / IEC 61010-1)
- Temperature Compensation: None
- USB Connection: USB (Micro B)
- W1 Radio Installed: No
- Wetted Materials: 316 Stainless Steel
- Wireless: None
- End 1 Connector: 1/4 in. Male NPT (ASME B1.20.1)
- End 1 Direction: Left
Sensor A (Bottom)
- Maximum Vacuum: 0 inHg / 0.0 kPa
- Burst Pressure: 40000 PSI / 2760 bar / 275 MPa
- Sensor Type: Pressure Sensor
- Maximum Storage Temperature: 167°F
- Minimum Storage Temperature: -40°F
- Maximum Operating Temperature: 122°F
- Minimum Operating Temperature: -4°F
- Process Connection: 1/4 in. Male NPT
- Wrench Size: 7/8 in.
- Measurement Type: Gauge Pressure
- Maximum Pressure; 10000 PSI / 700 bar / 70 MPa
- Wetted Materials: 316 Stainless Steel
- Engineering Units: atm, bar, kPa, MPa, psi, inHg at 39°F, kgf / cm^2, Torr, ftH2O at 39°F, cmHg at 32°F
- Media Compatibility: Air, Alcohol, Antifreeze, Ethylene Glycol, Hydraulic Oil, Inert Gas, Light Motor Oil, Mineral Oil, Natural Gas, Petroleum Based Oil, Ralston Calibration Oil, Skydrol, Transmission Fluid, Water, Windshield Washer Fluid
- Accuracy - Pressure Measurement: +/- 0.1% of Full Scale (ASME B40.100 Grade 4A/ISO Class 0.1)
Hose (XTXT-HOS-3ft)
- Burst Pressure: 40000 PSI / 2760 bar / 275 MPa
- Color: Blue
- Fluid Media: Air, Inert Gas, Natural Gas, Petroleum Based Oil, Water
- Inner Diameter: 0.08 in.
- Length: 3 ft.
- Materials: Reinforced Polyamide, Stainless Steel
- Maximum Operating Temperature: 140°F
- Maximum Pressure: 10000 PSI / 700 bar / 70 MPa
- Media Compatibility: Air, Inert Gas, Natural Gas, Petroleum Based Oil, Water
- Minimum Operating Temperature: -40°F
- Minimum Bend Radius: 1 in.
- Outer Diameter: 0.24 in.
- Type: XT
- Hose End 1: Female Quick-Test XT, Stainless Steel
- Hose End 2: Female Quick-Test XT, Stainless Steel
Bottle (QTHP-BOTL)
- Materials: Nylon
Case (QTHP-0275)
- Impact Resistance: MIL-STD-3010C
- Ingress Protection: IP67 (1 meter water submersion for 30 minutes), MIL-STD-810F
- Materials: ABS Plastic, Polyethylene foam
Bag (SM-0084)
- Materials: Zippered Nylon
Process Connection (XTHA-2MS0)
- Materials: Stainless Steel
- Maximum Operating Temperature: 225°F
- Maximum Pressure: 10000 PSI / 700 bar / 70 MPa
- Minimum Operating Temperature: 0°F
- Seal Materials: Teflon, Viton
- Wrench Size: 5/8 in.
- End 1 Connector: 1/4 in. Male NPT (ASME B1.20.1)
- End 1 Direction: Left
- End 2 Connector: Male Quick-Test XT
- End 2 Direction: Left
Reference Connection (XTHA-2FSA)
- Materials: Stainless Steel
- Maximum Operating Temperature: 225°F
- Maximum Pressure: 10000 PSI / 700 bar / 70 MPa
- Minimum Operating Temperature: 0°F
- Wrench Size: 3/4 in.
- Wrench Size: 23/32 in.
- End 1 Connector: 1/4 in. Female NPT (ASME B1.20.1)
- End 1 Direction: Left
- End 2 Connector: Female Quick-Test XT
- End 2 Direction: Left
The Ralston Instruments XTHP-EP-KIT3-GV Hydraulic Pump Calibration Kit provides users with everything they need to make precise calibrations. This kit features a hydraulic pump that converts mechanical energy into hydraulic energy to power hydraulic systems. Users are also provided with a LC20 pressure reference with a maximum pressure of 10,000 PSI that measures and displays pressure readings on a large, backlit screen. A Quick-Test hose provides a maximum pressure of 10,000 PSI. The Ralston Instruments XTHP-EP-KIT3-GV features a carrying case and accessories that users will need on the jobsite.
| Brand | Ralston |
|---|---|
| Condition | NEW |
- 1 - Hydraulic Pump with EPDM Seals (XTHP-EP)
- 1 - Digital Pressure Gauge (LC20-GV2M-00-00)
- 1 - 3 ft. Quick-Test XT (XTXT-HOS-3ft)
- 1 - Bottle (QTHP-BOTL)
- 1 - Hydraulic Pump Case (QTHP-0275)
- 1 - Zippered Bag (SM-0084)
- 1 - 1/4 in. Male NPT x Male Quick-Test XT Adapter (XTHA-2MS0)
- 1 - 1/4 in. Female NPT x Female Quick-Test XT Adapter (XTHA-2FSA)
- 1 - USB-A to Micro USB-B Cable (D-000040)
- 1 - ISO 17025:2017 Accredited Calibration Certificate for LC10/LC20/LC30 (SERV-0026)
