Ralston Instruments NPAK-1KPSIG-D
Nitropak Portable Nitrogen Pressure Calibration Kit with 1000 psi Digital Pressure Gauge, 1/4" Male NPT Process Connections, Hoses
NPAK1KPSIGD
NPAK-1KPSIG-D
Ralston Instruments NPAK-1KPSIG-D
Nitropak Portable Nitrogen Pressure Calibration Kit with 1000 psi Digital Pressure Gauge, 1/4" Male NPT Process Connections, Hoses
NPAK1KPSIGD
NPAK-1KPSIG-D
- Brand Name: Ralston
- Condition: NEW
- Complete kit includes nitrogen source, pressure gauge and all fittings and adapters to perform differential and static pressure calibrations using nitrogen
- Fine adjustment piston precisely controls pressure at 0.03 psi (2 mbar), 3000 psi (210 bar), or any range in between
- Equipped with on-board storage cylinder, nitrogen pressure regulator and precision volume controller for accurate control
- Easily refillable nitrogen cylinder holds enough gas for multiple calibrations
- ABS plastic case and ergonomic handle allow for easy transport in remote locations
- Hose, gauge adapter and process connection can be attached without thread sealant or a wrench
- Nylon bag holds accessories and conveniently attaches to inside of lid
- Storage compartment in control panel holds pressure reference test gauge
- Suitable for use in hazardous locations, including ATEX or IECEX Zone 0, 1 or 2 locations
- Designed to meet US Department of Transportation (DOT) and Canadian Transport Canada (TC) standards
- Designed to meet Pressure Equipment Directive (PED) and Transportable Pressure Equipment (TPED) standards
- CE Approved for use in European Union
- Pressure Reference: LC10 pressure gauge, 1000 psi (70 bar / 7 MPa), 1/4" male NPT bottom connection
- Reference Connection: 1/4" female NPT x female Quick-test, no check-valve, brass
- Process Connection 1: 1/4" male NPT x male Quick-test, no check-valve, brass
- Process Connection 2: 1/4" male NPT x male Quick-test, no check-valve, brass
- Hose 1: Quick-test 6900 psi hose with brass ends, 6 ft. long
- Hose 2: Quick-test 6900 psi hose with brass ends, 3 ft. long
Specifications:
- Max Pressure: 3000 psi (200 bar / 20 MPa)
- Max Vacuum: 10 InHg (33.9 kPa)
- Materials: Anodized Aluminum, Brass, Powder Coated Steel, Stainless Steel, Zippered Nylon with Velcro, Delrin
- Seal Materials: Buna-N, Delrin, Teflon
- Inlet Port: Male Quick-test with cap and chain
- Outlet Port: Male Quick-test with cap and chain
- Pressure Media: Nitrogen, inert gas
- Min Operating Temperature: 0 °F (-18 °C)
- Max Operating Temperature: 140 °F (60 °C)
- Fine Adjustment Resolution: 0.0005 psi
- Media Compatibility: Air, Inert Gas, Natural Gas
- Dimensions (L x W x H) 14.6 x 18.5 x 7.8 in. (20 x 47 x 38 cm)
- Weight: 29 lbs (13 kg)
The Ralston NPAK-1KPSIG-D Nitropak Portable Nitrogen Pressure Calibration Kit with 1000 psi Digital Pressure Gauge provides a high pressure nitrogen source for calibrating differential and static pressure instrumentation using an external pressure calibrator (sold separately). It includes an on-board storage cylinder, nitrogen pressure regulator and a precision volume controller for extremely fast and accurate pressure control. Nitropak users can easily reach each test point without pumping or leaky connections, up to 3000 psi (210 bar). The Ralston Nitropak takes the hard work out of field-based calibrations and provides an all-in-one, easy to use, pressure control solution.
Key Benefits of the NitroPak for Pressure Testing with Nitrogen
Compressed Gas on Hand
Fill the NItropak at the shop and have enough compressed gas for a day or more. It is easy to fill with the included hoses. Simply pressurize it until it is full, disconnect the hose, and your nitrogen pressure testing equipment is ready to go.
Organized and Easily Portable
The Nitropak includes storage for hoses, adapters and a pressure gauge. There is a bag to hold hoses and adapters and a pocket to hold a pressure gauge as well.
Excellent for Hazardous Locations
Because it has no electronics in it, there are no issues with using the Nitropak in North American Class 1, Division 1 or 2 locations, ATEX or IECEX Zone 0, 1 or 2 locations. It's an ideal compressed gas solution in any environment.
Easy to Carry in Remote Locations
The Nitropak is great for remote locations. With a carbon fiber cylinder and ABS plastic case with ergonomic handle, the Nitropak is the nitrogen pressure test kit you can take with you wherever you need to go, from towers to areas far off road.
Suitable for both Differential and Static Calibrations in the Field
Use the fine adjust piston alone to create pressure up to 400 inH20 (400 mbar). Use the compressed gas from the internal cylinder to go to pressures from 400 inH20 to 3000 psi (200 bar).
| Brand | Ralston |
|---|---|
| Condition | NEW |
| Vendor Alias | NPAK-1KPSIG-D |
- 1 - NPAK Nitrogen Source
- 1 - LC10 Digital Pressure Gauge, 1000 psi (70 bar / 7 MPa), 1/4" Male NPT Bottom Connection (LC10-GP2M)
- 1 - 1/4" Female NPT x Female Quick-Test Reference Connection, Brass (QTHA-2FBA)
- 1 - 1/4" Male NPT x Male Quick-Test Process Connection, Brass (QTHA-2MB0)
- 1 - 1/4" Male NPT x Male Quick-Test Process Connection, Brass (QTHA-2MB0)
- 1 - Quick-Test 6900 psi Hose with Brass Hose Ends, 6 ft. long (QTQT-HOS-6ft)
- 1 - Quick-Test 6900 psi Hose with Brass Hose Ends, 3 ft. long (QTQT-HOS-3ft)
- 1 - USB-A to Micro USB-B Cable, 2 m long (D-000040)
Customers Also Bought
