Ralston Instruments QTFT-3MB0-RS
3/8" Male BSPP (ISO 228/1) x Male Quick-Test Fitting with Cap and Chain, Brass
QTFT3MB0RS
QTFT-3MB0-RS
Ralston Instruments QTFT-3MB0-RS
3/8" Male BSPP (ISO 228/1) x Male Quick-Test Fitting with Cap and Chain, Brass
QTFT3MB0RS
QTFT-3MB0-RS
- Brand Name: Ralston
- Condition: NEW
- Connects female BSPP (ISO 228/1) parallel thread to Quick-test hose
- Supplied with cap and chain to make permanent installation possible
- Ideal for processes where frequent calibrations are performed
- Pressure tight seal is made on a bonded seal ring
- No check valve
- Length: 1.82 in. (47 mm)
- Width: 1.06 in. (27 mm)
- Materials: Brass
- Max Operating Temperature: 225 °F (105 °C)
- Max Pressure: 5000 PSI (350 bar / 35 MPa)
- Max Vacuum: 0 InHg (0.0 kPa)
- Seal Materials: Buna-N
- Wrench Size: 7/8 in. (23 mm)
- End 1 Connector: Male Quick-test
- End 2 Connector: G 3/8 Male BSPP (ISO 228)
The Ralston QTFT-3MB0-RS 3/8" Male BSPP (ISO 228/1) x Male Quick-test Fitting with Cap and Chain connects female BSPP (ISO 228/1) parallel thread to a Quick-test hose for permanent installation where frequent calibrations are performed. Users can connect Quick-test hoses to any female BSPP device, such as Druck, SI, Fluke or other hand pumps or pressure calibrators. The pressure tight seal is made on a bonded seal ring. The included cap and chain make permanent installation possible on any process with female BSPP connections.
| Brand | Ralston |
|---|---|
| Condition | NEW |
| Vendor Alias | QTFT-3MB0-RS |
- 1 - Fitting with Cap and Chain
