Ralston Instruments QTFT-3MS0
3/8" Male NPT x Male Quick-Test Fitting with Cap and Chain, Stainless Steel
QTFT3MS0
QTFT-3MS0
Ralston Instruments QTFT-3MS0
3/8" Male NPT x Male Quick-Test Fitting with Cap and Chain, Stainless Steel
QTFT3MS0
QTFT-3MS0
- Brand Name: Ralston
- Condition: NEW
- Connects to pressure transmitters, EFMs, flow computers and other NPT devices under test
- Provides permanent connection when used with thread sealant
- Removable cap allows easy access to connect Quick-test hose to process for calibration purposes
- Can be easily sealed bubble-tight again when calibration is complete
- Equipped with cap and chain
- No check valve
- Length: 1.97 in. (51 mm)
- Width: 0.75 in. (20 mm)
- Materials: Stainless steel
- Max Operating Temperature: 225 °F (105 °C)
- Max Pressure: 5000 PSI (350 bar / 35 MPa)
- Seal Materials: Buna-N
- Wrench Size: 3/4 in. (20 mm)
- End 1 Connector: Male Quick-test
- End 2 Connector: 3/8" Male NPT (ASME B1.20.1)
The Ralston QTFT-3MS0 3/8" Male NPT x Male Quick-test Fitting with Cap and Chain connects to pressure transmitters, EFMs, flow computers and other NPT devices under test, using thread sealant for a permanent connection. The removable cap provides easy access to connect a Quick-test hose to the process for calibration purposes and is easily sealed bubble-tight again when calibration is complete. The included cap and chain furthermore make calibration easy and quick by connecting and disconnecting a hose without a wrench or thread sealant.
| Brand | Ralston |
|---|---|
| Condition | NEW |
| Vendor Alias | QTFT-3MS0 |
- 1 - Fitting with Cap and Chain
