QTHA-1MB0 1/8" Male NPT x Male Quick-Test Adapter, Brass (2 pcs)

• Connects female NPT devices to Quick-test hoses with brass or stainless steel hose ends
• No check valve
• Materials: Brass
• Max Operating Temperature: 225 °F (105 °C)
• Max Pressure: 5000 PSI (350 bar / 35 MPa)
• Max Vacuum: 0 InHg (0.0 kPa)
• Seal Materials: Buna-N
• Wrench Size: 9/16 in. (15 mm)
• End 1 Connector: Male Quick-test
• End 2 Connector: 1/8" Male NPT (ASME B1.20.1)

QTHA-2MB0 1/4" Male NPT x Male Quick-Test Adapter, Brass (2 pcs):

• Connects female NPT devices to Quick-test hoses with brass or stainless steel hose ends
• No check valve
• Burst Pressure: 20,000 PSI (1380 bar / 140 MPa)
• Materials: Brass
• Max Operating Temperature: 225°F (105°C)
• Max Pressure: 5000 PSI (350 bar / 35 MPa)
• Max Vacuum: 0 InHg (0.0 kPa)
• Seal Materials: Buna-N
• Wrench Size: 9/16 in. (15 mm)
• End 1 Connector: Male Quick-test
• End 2 Connector: 1/4" Male NPT (ASME B1.20.1)

QTQT-HOS-6ft Brass Quick-Test Hose, 6900 psi, 6 ft. long (2 pcs):

• Connects to any pressure instrumentation, hand pump, calibration source or device under test
• Length: 6 ft. (1.83 m)
• Burst Pressure: 27000 PSI (1860 bar / 185 MPa)
• Fluid Media: Air, Inert Gas, Natural Gas, Petroleum Based Oil, Water
• Materials: Brass
• Max Operating Temperature: 140 °F (60 °C)
• Max Pressure: 6900 PSI (475 bar / 48 MPa)
• Max Vacuum: 0 InHg (0.0 kPa)
• Minimum Bend Radius: 1 in. (26 mm)
• Inner Diameter: 0.08 in. (3.00 mm)
• Outer Diameter: 0.2 in. (6.00 mm)
• Type: QT
• Hose End 1: Female Quick-test, brass
• Hose End 2: Female Quick-test, brass