Ralston Instruments SP0V-100PSIG-D
Gas Sampling Pump with 100 psi Digital Pressure Gauge, 1/4" Female NPT Reference Connection
Ralston Instruments SP0V-100PSIG-D
Gas Sampling Pump with 100 psi Digital Pressure Gauge, 1/4" Female NPT Reference Connection
- Brand Name: Ralston
- Condition: NEW
- Pulls low-pressure gas from a well and boosts it to 25 psi to pump it into a sample cylinder
- Hard Anodized aluminum body and stainless steel fittings prevent corrosion or cross contamination of the sample
- Inlet and outlet hose equipped with nylon inner core tube that does not affect the sample
- Low compression rate will not adversely affect the sample by bringing gas close to hydrocarbon dew point (25 psi)
- Hydrocarbon-free lubricant does not contaminate the sample with foreign hydrocarbons
- Designed in accordance with API MPMS Chapter 14.1 on natural gas sampling
- Ideally suited for use with purge and fill method of gas sampling
- Pressure Reference: LC10 pressure gauge, 100 psi (7 bar / 700 kPa), 1/4" Male NPT bottom connection
- Reference Connection: 1/4" female NPT x female Quick-test, no check-valve, stainless steel
- Process Connection 1: 1/4" male NPT x male Quick-test, no check-valve, stainless steel
- Process Connection 2: 1/4" male NPT x male Quick-test, no check-valve, stainless steel
- Hose 1: Quick-test 6900 psi hose with stainless steel ends, 6 ft. long
- Hose 2: Quick-test 6900 psi hose with stainless steel ends, 3 ft. long
- Max Pressure: 100 PSI (7 bar / 700 kPa)
- Materials: Anodized Aluminum, Stainless Steel
- Seal Materials: Delrin, Viton
- Inlet Port: Male Quick-test with check-valve
- Outlet Port: Male Quick-test, Male Quick-test with cap and chain
- Pressure Media: Gas
- Min Operating Temperature: 0 °F (-18 °C)
- Max Operating Temperature: 140 °F (60 °C)
- Media Compatibility: Air, Inert Gas, Natural Gas
The Ralston SP0V-100PSIG-D Gas Sampling Pump with 100 psi Digital Pressure Gauge, 1/4" Female NPT Reference Connection, can pull low-pressure gas from a well and boost it to 25 psi to pump it into a sample cylinder. The pump features a hard anodized aluminum body and stainless steel fittings, preventing issues with corrosion, cracking or cross contamination of the sample. Furthermore, the inlet and outlet hose have a nylon inner core tube that does not affect the sample. The low compression rate will not adversely affect the sample by bringing the gas close to the hydrocarbon dew point (25 psi/2 bar). In addition, hydrocarbon-free lubricant will not contaminate the sample with any foreign hydrocarbons. The pump is designed in accordance with API MPMS Chapter 14.1 on natural gas sampling. It is ideally suited for use with the purge and fill method of gas sampling.
Brand | Ralston |
---|---|
Condition | NEW |
Vendor Alias | SP0V-100PSIG-D |
- 1 - SP0V Gas Sampling Pump
- 1 - LC10 Pressure Gauge, 100 psi (7 bar / 700 kPa), 1/4" Male NPT Bottom Connection (LC10-GJ2M)
- 1 - 1/4" Female NPT x Female Quick-Test Reference Connection, Stainless Steel (QTHA-2FSA)
- 1 - 1/4" Male NPT x Male Quick-Test Process Connection, Stainless Steel (QTHA-2MS0-VT)
- 1 - 1/4" Male NPT x Male Quick-Test Process Connection, Stainless Steel (QTHA-2MS0-VT)
- 1 - Quick-Test 6900 psi Hose with Stainless Steel Ends, 6 ft. long (QSQS-HOS-6ft)
- 1 - Quick-Test 6900 psi Hose with Stainless Steel Ends, 3 ft. long (QSQS-HOS-3ft)
- 1 - USB-A to Micro USB-B Cable, 2 m long (D-000040)