Ridgid 122XL
Copper Cutting and Prep Machine with Accessory Set, 1/2 in. to 4 in. Capacity, 300 RPM, 115V
Ridgid 122XL
Copper Cutting and Prep Machine with Accessory Set, 1/2 in. to 4 in. Capacity, 300 RPM, 115V
The RIDGID 122XL Copper Cutting and Prep Machine with Accessory Set is designed to cut, clean, ream and deburr copper and stainless steel tubing and fittings. With an adjustable cutting handle, the reamer removes burrs from inside the tubing. The deburring disk cleans burrs from the outside. Includes scale for tube measurement.
- Guide rollers ensure a straight cut with no tracking
- Fitting brush kit includes 6 brushes, storage rack and collet
- Cut, cleans, reams, and deburrs copper and stainless steel tubing and fittings
- Powerful 1/3 HP induction motor drives rollers at 300 RPM
- Rugged O.D. cleaning brush cleans tubing quickly with minimal effort
- Core reamer easily removes turbulence-causing burrs
- Cutting handle adjusts to accommodate different tubing sizes
- Guide rollers ensure a straight cut with no tracking
- Built-in 1/2" incremental scale allows for quick, easy measuring
- Easy to transport to job site with large carrying handle
- Cutter wheel tested to over 10,000 cuts
- Fitting brush kit includes six brushes, storage rack, and collet
- Approved to UL standards (NRTLC) and CSA
Specifications:
- Tube and fitting capacity: 1/2 in. to 4 in.
- Copper Tubes and Fittings: ASTM B88 Type K, L, M
- Stainless Steel Tubes: Max wall thickness up to 0.065" (1.65 mm)
- Switch: Toggle On/Off
- Cutter Wheel: Model 122 SS
- Reamer: Single flute cone, RH, 1/2" to 2"
- Motor: 1/3 HP, 115V, 60Hz induction motor
- Dimensions: 16.5 x 17.1 x 15 in.
- Weight: 72 lbs. (32.7 kg)
The RIDGID 122XL (10973) Copper Cutting and Prep Machine with Accessory Set, 1/2 in. to 4 in. Capacity, 300 RPM, 115V, is designed to cut, clean, ream and deburr copper and stainless steel tubing and fittings quickly and professionally. Weighing only 72 lbs (32.7 kg) and possessing a conveniently located carrying handle, the Model 122XL is ideal for transport directly to the job site. The rugged cast aluminum housing and powerful 1/3 HP induction motor ensure a long life.
Cutting is performed by turning the tubing with motor-driven rollers, while a cutter wheel is manually actuated by a rack and pinion. An adjustable cutting handle accommodates different diameter tubes and a scale is included for tube measurement. The reamer removes burrs from the inside of the tubing while the brush cleans the external surface in preparation for joining. The machine can also clean the inside of fittings using individually sized brushes that are attached to the quick-change adapter. The deburring disk cleans burrs from the outside surface of the tubing.
Please note that the 122XL Copper Cutting and Prep Machine is not designed for use with pipe.
Country of Origin | United States |
---|---|
Brand | Ridgid |
Condition | NEW |
- 1 - Copper Cutting and Prep Machine 115V
- 1 - O.D. Deburring Disk (46105)
- 1 - 2" Reamer Cone Assembly (94687)
- 1 - O.D. Cleaning Brush (94682)