Ridgid 378
Geared Ratchet Tube Bender for 7/8 in. Tubing
The RIDGID 378 Geared Ratchet Tube Bender uses high-geared mechanical ratios to bend heavy-wall steel tube (up to 1/8" wall thickness), stainless steel tube (up to 3/32" wall thickness) and hard copper water tube (types K and L). It produces uniform bends up to 180° with no need to anneal tubing or use special temper grade tubing.
- Marked with inch and metric sizes
- Radius bend at center of tube: 3 3/4"
- Tube outside diameter: 7/8"
- Designed to bend heavy-wall steel tube (up to 1/8" wall thickness), stainless steel tube (up to 3/32" wall thickness), and hard copper water tube (types K and L)
- Produces uniform bends up to 180° with no need to anneal tubing or to use special temper grade tubing
- High-geared design is easy to operate with minimal effort required
- Marked with inch and metric sizes
- Radius bend at center of tube: 3 3/4 in. (76 mm)
- Tube outside diameter: 7/8 in. (22 mm)
The RIDGID 378 (35180) Geared Ratchet Tube Bender uses high-geared mechanical ratios to bend heavy-wall steel tube (up to 1/8" wall thickness), stainless steel tube (up to 3/32" wall thickness) and hard copper water tube (types K and L). The bender produces uniform bends up to 180° with no need to anneal tubing or use special temper grade tubing. The 358 Tube Bender is easy to operate, keeping effort required to a minimum.
Country of Origin | United States |
---|---|
Brand | Ridgid |
Condition | NEW |