Ridgid 535-400
3-Phase Manual Chuck Pipe Threading Machine Only, 35/70 RPM, 1.8/2.3 HP, 400V, 3.5/5.1 A
Ridgid 535-400
3-Phase Manual Chuck Pipe Threading Machine Only, 35/70 RPM, 1.8/2.3 HP, 400V, 3.5/5.1 A
The RIDGID 535-400 3-Phase Manual Chuck Pipe Threading Machine centers, chucks and rotates pipe, conduit and bolt stock while cutting, reaming and threading (requires dies and die head, sold separately). With an integral oiling system, the large chip tray and oil reservoir make it ideal for uninterrupted threading.
- Speed hammer-type chuck with rocker-action jaws
- Wide top cover for keeping tools
- High clearance carriage increases maneuverability
- Speed hammer-type chuck with rocker-action jaws secures pipe tightly
- Large chip tray and 1.75 gallon oil tray allow for longer uninterrupted threading
- Wide top cover provides space for keeping tools and fittings handy
- High clearance carriage increases workpiece maneuverability to make threading easier
- Suitable for use with geared threaders (Models 141 and 161, sold separately) for threading large diameter pipe
- Length gauge ensures quick and accurate cut-off
- Uses Model 816/817 semi-automatic, Model 815A self-opening, or Model 811A quick-opening die heads
- Die head and dies all sold separately
Specifications:
- Pipe Capacity: 1/8" to 2" (3mm to 50mm); 2 1/2" to 4" (65mm to 100mm) with 141 Geared Threader; 4" to 6" (100mm to 150mm) with 161 Geared Threader
- Bolt Capacity: 1/4" to 2" (6mm to 50mm)
- Controls: Rotary Type 2/1/0/1/2 Switch for speed and direction control; integral foot switch
- Chuck: Speed chuck with replaceable rocker-action jaw inserts
- Rear Centering Device: Cam-action, turns with chuck
- Cutter: Model 820 Wheel-Type Cutter, self-centering, full-floating, 1/8" to 2"
- Reamer: Model 341, 5-flute cone, RH, 1/8" to 2"
- Oil Pump: Self-priming gerotor oil pump
- Operating Speeds: 35/70 RPM
- Motor: 3-Phase Induction, 1.8/2.3 HP, 400V, 3.5/5.1 Amps
The RIDGID 535-400 (29918) 3-Phase Manual Chuck Pipe Threading Machine Only, 35/70 RPM, 1.8/2.3 HP, 400V, 3.5/5.1 A is an electric motor-driven machine that centers and chucks pipe, conduit and bolt stock, and rotates it while cutting, reaming and threading operations are performed (requires dies and die head, sold separately). An integral oiling system is provided to flood the work with thread cutting oil during the threading operation. With proper optional equipment, the Model 535 Threading Machine can be used to thread larger pipe, short or close nipples, or be used for roll grooving.
The 400V three-phase machine can be operated at 35 or 70 RPM. This is controlled by the machine switch, which is marked 2-1-0-1-2: 0 is the OFF position, 1 is 35 rpm (Forward and Reverse), and 2 is 70 rpm (Forward and Reverse).
The 535-400 (29918) 3-Phase Manual Chuck Pipe Threading Machine maintains the ruggedness of the industry workhorse while adding the features that make the threading operation more productive. A large chip tray and oil reservoir make the Model 535 ideal for longer uninterrupted threading. The Model 535 is designed around maximum uptime with the upgrades that matter most to the pipe working professional.
Country of Origin | United States |
---|---|
Brand | Ridgid |
Condition | NEW |
- 1 - 535 Pipe Threading Machine
- 1 - 341 Reamer Assembly (42365)
- 1 - 820 Wheel-Type Cutter (42390)
- 1 - Spare Wheel for E1032 Cutter (44185)
- 1 - 3/16" Hex Key (46030)
- 1 - 5/32" Hex Key (46015)
- 1 - Nu-Clear Thread Cutting Oil (70835)