Ridgid 535A-400

3-Phase Automatic Chuck Pipe Threading Machine Only, 35/70 RPM, 1.8/2.3 HP, 400V, 3.5/5.1 A

29933
535A-400

Ridgid 535A-400

3-Phase Automatic Chuck Pipe Threading Machine Only, 35/70 RPM, 1.8/2.3 HP, 400V, 3.5/5.1 A

29933
535A-400

The RIDGID 535A-400 3-Phase Automatic Chuck Pipe Threading Machine centers, chucks and rotates pipe, conduit and bolt stock while cutting, reaming and threading (requires dies and die head, sold separately). With an automatic chuck to grip and center pipe, it has a large chip tray and oil reservoir for longer uninterrupted threading.

  • Automatic chuck with reversible forged jaws
  • Wide top cover provides space for tools
  • Rotary Type 2/1/0/1/2 Switch
$7,284.95 Price $8,939.65
  • Automatic chuck with reversible forged jaws centers and grips work piece instantly
  • Large chip tray and 1.75 gallon oil reservoir allow for longer uninterrupted threading
  • Wide top cover provides space for keeping tools and fittings handy
  • High clearance carriage increases workpiece maneuverability to make threading easier
  • Suitable for use with geared threader Model 141 (sold separately) for threading large diameter pipe
  • Length gauge ensures quick and accurate cut-off
  • Uses Model 816/817 semi-automatic, Model 815A self-opening, or Model 811A quick-opening die heads
    • Die head and dies all sold separately

Specifications:

  • Pipe Capacity: 1/8" to 2" (3mm to 50mm); 2 1/2" to 4" (65mm to 100mm) with 141 Geared Threader
  • Bolt Capacity: 1/4" to 2" (6mm to 50mm)
  • Controls: Rotary Type 2/1/0/1/2 Switch for speed and direction control; integral foot switch
  • Chuck: Automatic with four reversible forged jaws
  • Rear Centering Device: Automatic, centering only
  • Cutter: Model 820 Wheel-Type Cutter, self-centering, full-floating, 1/8" to 2"
  • Reamer: Model 341, 5-flute cone, RH, 1/8" to 2"
  • Oil Pump: Self-priming gerotor oil pump
  • Operating Speeds: 35/70 RPM
  • Motor: 3-Phase Induction, 1.8/2.3 HP, 400V, 3.5/5.1 Amps

The RIDGID 535A-400 (29933) 3-Phase Automatic Chuck Pipe Threading Machine Only, 35/70 RPM, 1.8/2.3 HP, 400V, 3.5/5.1 A is an electric motor-driven machine that centers and chucks pipe, conduit and bolt stock, and rotates it while cutting, reaming and threading operations are performed (requires dies and die head, sold separately). The threading machine has an automatic chuck to grip and center pipe.

An integral oiling system is provided to flood the work with thread cutting oil during the threading operation. With proper optional equipment, the Model 535A Threading Machine can be used to thread larger pipe, short or close nipples, or be used for roll grooving.

The 400V three-phase machine can be operated at 35 or 70 RPM. This is controlled by the machine switch, which is marked 2-1-0-1-2: 0 is the OFF position, 1 is 35 rpm (Forward and Reverse), and 2 is 70 rpm (Forward and Reverse).

The 535A-400 (29933 Automatic Chuck Pipe Threading Machine maintains the ruggedness of the industry workhorse while adding the features that make the threading operation more productive. A large chip tray and oil reservoir make the Model 535A ideal for longer uninterrupted threading. The Model 535A is designed around maximum uptime with the upgrades that matter most to the pipe working professional.

More Information
Country of OriginUnited States
BrandRidgid
ConditionNEW
  • 1 - 535A Pipe Threading Machine
  • 1 - 341 Reamer Assembly (42365)
  • 1 - 820 Wheel-Type Cutter (42390)
  • 1 - Spare Wheel for E1032 Cutter (44185)
  • 1 - 3/16" Hex Key (46030)
  • 1 - 5/32" Hex Key (46015)
  • 1 - Extreme Performance Thread Cutting Oil (74012)