Ridgid B-500-30-230
Portable Pipe Beveller with 30 Degree Cutter Head, 4 in. and Larger Pipe Capacity, 230V
Ridgid B-500-30-230
Portable Pipe Beveller with 30 Degree Cutter Head, 4 in. and Larger Pipe Capacity, 230V
The RIDGID B-500-30-230 Portable Pipe Beveller with 30° Cutter Head (230V) is for beveling steel and stainless steel pipe ends and plate edges on material up to 0.5" thick for welding. It forms 30° bevels in a single pass without coolant. It securely grips the work piece between guide rolls and drive roll. It has a detachable hand crank, indicator lights and protective frame.
- Adjustable land width from 0" to 3/16"
- Capacity: 4" and larger pipe, flat plate
- Suitable for bevelling most steel and stainless steel pipe ends and plate edges
- Capable of bevelling 10 in. diameter schedule 40 pipe in 45 seconds
- Pipe is cool to touch immediately following bevelling
- Conical cutter head with replaceable cutter inserts produces 30° bevels
- Accurate bevel angle around diameter of pipe allows for optimal number of cover passes
- Produces a machined finish due to 6 replaceable cutter inserts working simultaneously
- LED indicators provide speed monitoring to ensure optimal cutter performance
- Adjustable land width from 0 in. to 3/16 in. to meet welders' requirements
- Fast set-up and rotational speed
- Patent-pending clamp system firmly secures tool to pipe
- Spark-free operation
- Specifications:
- Capacity: 4 in. and larger pipe, flat plate
- Pipe Wall/ Plate Thickness: Min 3/16 in. / Max 1/2 in.
- Bevel Angle: 30°; 37.5° and 45° (with optional cutter heads)
- Land Width: 0 in. to 3/16 in., in approximately 1/32 in. increments
- Materials: Most Steel, Stainless Steel
- Size (L x W x H): 15.8 in. x 11.5 in. x 13.3 in.
- Motor Type: Universal single-phase
- RPM: 950 (no load)
- Power: 1.2 HP
- Rating: 230V, 6.5 Amps, 50/60 Hz
- Body: Steel frame
The RIDGID B-500-30-230 (55098) Portable Pipe Beveller with 30 Degree Cutter Head, 4 in. and Larger Pipe Capacity, 230V, is used for bevelling most steel and stainless steel pipe ends and plate edges on material up to 0.5" (13 mm) thick in preparation for welding. Conical cutter heads with replaceable cutter inserts are driven by a motor/gearbox to produce 30°, 37.5°, or 45° bevels (only the 30° cutter head is included).
The B-500 forms the bevel in a single pass without the need of any further dressing; no coolant or cutting oil is used. Land width can be adjusted in approximately 1/32" (0.8 mm) increments from 0 to 0.188" (0 to 4.8 mm). The beveller securely grips the work piece between guide rolls and a drive roll. A detachable hand crank is included to manually move the cutter head through the material being bevelled. Indicator lights on the machine provide feedback on proper cranking speed. The frame helps protect the motor/gearbox and aids in beveller handling.
Country of Origin | United States |
---|---|
Brand | Ridgid |
Condition | NEW |
- 1 - Pipe Beveller
- 1 - 30 Degree Cutter Head with 6 Inserts (48863)
- 1 - Crank Handle Assembly (50633)
- 1 - Torx Wrench T15/S7 (48888)
- 1 - 1" Spanner Wrench (48893)
- 1 - 5/16 Hex Key (48898)
- 1 - Operator's Manual