Ridgid K-1500SPB
Sectional Drain Cleaning Machine for 2 in. to 10 in. Drain Lines, with Low-Profile B-Frame Assembly and A-34-15 Rear Guide Hose (120V)
Ridgid K-1500SPB
Sectional Drain Cleaning Machine for 2 in. to 10 in. Drain Lines, with Low-Profile B-Frame Assembly and A-34-15 Rear Guide Hose (120V)
The RIDGID K-1500SPB Sectional Drain Cleaning Machine and A-34-15 Rear Guide Hose (120V). Driven by an induction motor with a grounded electrical system, it has an integral Ground Fault Interrupter (GFCI) and sectional-type cable. A clutch handle controls cable rotation. It runs 1 1/4" cable and 3" to 10" lines up to 300'.
- Designed for 2" to 10" drain lines
- Includes 10" solid ball bearing wheels
- Low-profile "B" frame fits most crawl spaces
- Designed for cleaning 2 in. to 10 in. drain and sewer lines through 300 feet
- High power construction cuts through blockages fast
- Equipped with full 1 HP TEFC motor and heavy-duty rotary switch
- Single user can easily clean the heaviest blockages indoors or outside
- Unique, easy-to-use, instant-acting cable clutch maximizes operator control:
- Pull handle down and cable spins at 600 RPM
- Release handle, cable stops instantly
- Equipped with 10 in. solid ball bearing wheels for easy transport to job site
- Low-profile "B" frame design will fit most crawl spaces, loads and unloads from truck easily
- Built to run 15-ft sections of 1 1/4" cable (sold separately) to clean 3" to 10" lines to 300 feet
- Easy clutch jaw change-out adapts machine to run 15-ft sections of 7/8" cable (sold separately) through 2" to 4" lines up to 175 feet
- Approved by CSA to CSA and UL Standards
- Voltage: 115V
The RIDGID K-1500SPB (43507) Sectional Drain Cleaning Machine for 2 in. to 10 in. Drain and Sewer Lines, with Low-Profile B-Frame Assembly and A-34-15 Rear Guide Hose (120V) is designed for cleaning 2" to 10" drain and sewer lines. The machine is driven by an induction motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle or rotary switch provides FORWARD/OFF/REVERSE control of the motor.
The K-1500SPB machine is designed to use sectional-type cable that has a quick coupling system for disconnecting tools. The cable is manually fed in and out of the machine and rotates at a cable speed 600 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released.
The K-1500SPB machine comes equipped to run 1 1/4" cable to clean 3" to 10" lines to 300 ft. It can be easily adapted to use 7/8" cable to clean 2" to 4" lines up to 175 feet.
Country of Origin | United States |
---|---|
Brand | Ridgid |
Catalog | 43507 |
Condition | NEW |
UPC | 095691435071 |
Vendor Alias | 43507 |
- 1 - 115V Sectional Drain Cleaning Machine on B-Frame Assembly
- 1 - A-34-12 Rear Guide Hose
- 1 - A-12 Pin Key
- 1 - Drain Cleaning Mitt