Ridgid K-60SP 230V w/A61/A62/A25
Sectional Drain Cleaning Machine for 1 1/4 in. to 4 in. Drain Lines, with A-61 Tool Kit, A-62 Cable Kit, A-25 Cable Kit, A-60-15 Rear Guide Hose, 230V
94497
K-60SP 230V w/A61/A62/A25
94497
Ridgid K-60SP 230V w/A61/A62/A25
Sectional Drain Cleaning Machine for 1 1/4 in. to 4 in. Drain Lines, with A-61 Tool Kit, A-62 Cable Kit, A-25 Cable Kit, A-60-15 Rear Guide Hose, 230V
94497
K-60SP 230V w/A61/A62/A25
94497
The RIDGID K-60SP 230V w/A61/A62/A25 is a Sectional Drain Cleaning Machine with A-62 and A-25 Cable Kits, Tool Kit and Rear Guide Hose. Driven by a 1/2 HP motor, it has an integral Ground Fault Interrupter GFCI and rear handle. The sectional-type cable has a quick change coupling system and rotates at 600 RPM. The clutch handle controls cable rotation.
- For cleaning 1 1/4" to 4" drain lines
- Simple adjustment knob spins 7/8" and 5/8" diameter cable
$3,037.86 Price $3,247.85
Log in for member pricing
- Designed for cleaning 1 1/4" to 4" drain lines
- Suitable for institutional, commercial or residential cleaning
- Ideal for septic tank vacuum truck operators
- Excellent for rooftop vent stacks: rear handle allows for easy transporting up ladders and onto rooftops
- Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages
- Remove only two bolts to access belt drive or jaw set for cleaning or replacement
- Simple adjustment knob allows unit to spin both 7/8" and 5/8" diameter cable:
- 7/8" cable (C-10) cleans 2" to 4" lines through 150 feet
- 5/8" cable (C-7, C-8, C-9) cleans 1 1/4" to 4" lines through 125 feet
- Unique, easy-to-use, instant-acting cable clutch maximizes operator control:
- Pull handle down and cable spins at 600 RPM
- Release handle, cable stops instantly
- Equipped with 1/2 HP motor
- Voltage: 230V
The RIDGID K-60SP 230V w/A61/A62/A25 (94497) Sectional Drain Cleaning Machine for 1.25" to 4" Drain Lines, with A-62 and A-25 Cable Kits, Tool Kit, and Rear Guide Hose is a portable drain cleaning machine designed to clean 1 1/4" to 4" drain lines. Applications include laundry tubs, floor drains, roof vents and stack lines. The rear handle allows for transporting up ladders and cleaning roof-top vent stacks.
The K-60SP machine is driven by a 1/2 HP motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle switch provides FOR/OFF/REVERSE control of the motor.
The K-60SP is designed to use sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 600 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. An adjustment knob allows the K-60SP to use both 5/8" and 7/8" sectional cable.
| Country of Origin | United States |
|---|---|
| Brand | Ridgid |
| Catalog | 94497 |
| Condition | NEW |
| UPC | 095691944979 |
| Vendor Alias | 94497 |
- 1 - 230V Sectional Drain Cleaning Machine
- 1 - A-60-12 Rear Guide Hose
- 1 - A-12 Pin Key
- 1 - Drain Cleaning Mitt
- 1 - A-61 Tool Kit:
- 1 - T-101 Straight Auger
- 1 - T-102 Funnel Auger
- 1 - T-107 Spade Cutter
- 1 - T-125 Retrieving Auger
- 1 - T-150-1 Sharktooth Cutter
- 1 - A-3 Tool Box
- 1 - A-62 Cable Kit:
- 1 - Five Sections of C-10 Cable, 7/8" x 15 ft. each (75 ft. total)
- 1 - A-8 Cable Carrier
- 1 - A-25 Cable Kit:
- 5 - Sections of C-8 Cable, 5/8" x 7 1/2 ft. each (37 1/2 ft. total)
- 1 - A-10 Cable Carrier
- 1 - T-201 Straight Auger
- 1 - T-202 Bulb Auger
- 1 - T-205 "C" Cutter
- 1 - A-13 Coupling Pin Key
Customers Also Bought
RIDGID C-9 (51317) 5/8 in. x 10 ft. Cable with Heavy-Duty Wind
$60.55 Price $68.80
RIDGID C-8 (62270) 5/8 in. x 7 1/2 ft. Cable with All-Purpose Wind
$38.15 Price $43.35
RIDGID C-10 (62275) 7/8 in. x 15 ft. Cable with All-Purpose Wind
$77.79 Price $88.40
Related Products
-
RIDGID C-10PC (25036) 7/8 in. x 15 ft. Plastic Core Cable with All-Purpose WindModel No. C-10PCCatalog No. 25036RIDGIDDiscontinuedReplaced with:Log in for member pricing -
RIDGID T-125 (27642) Straight Retrieving Auger for K-60SP and K-3800 Drain Cleaning MachinesModel No. T-125Catalog No. 27642$23.95 Price $33.30Log in for member pricingIn stock: 3 -
RIDGID T-127 (30007) 7/8 in. Trap Leader for K-60SP Sectional MachineModel No. T-127Catalog No. 30007$36.95 Price $53.15Log in for member pricingIn stock: 1This item ships FREE -
RIDGID A-35 (48472) C-8 5/8 in. Cable Kit for K-60SP Sectional Machines, with 6 Sections C-8 CableModel No. A-35Catalog No. 48472$325.21 Price $422.30Log in for member pricingThis item ships FREE -
RIDGID A-35TW (48477) C-7 5/8 in. Tight-Wind Cable Kit for K-60SP Sectional MachinesModel No. A-35TWCatalog No. 48477$383.95 Price $527.90Log in for member pricingThis item ships FREE -
RIDGID T-141 (54842) 1 1/2 in. Knife Blade Cutter K-60SP and K-3800 Drain Cleaning MachinesModel No. T-141Catalog No. 54842$35.95 Price $51.05Log in for member pricingThis item ships FREE -
RIDGID T-142 (54852) 2 1/2 in. Knife Blade Cutter K-60SP and K-3800 Drain Cleaning MachinesModel No. T-142Catalog No. 54852$39.95 Price $57.10Log in for member pricingThis item ships FREE -
RIDGID A-1 (59205) Left-Hand Drain Cleaning MittModel No. A-1Catalog No. 59205$26.95 Price $38.70Log in for member pricingIn stock: 1 -
RIDGID A-10 (59210) Cable Carrier for C-8, C-9, and C-10 Cables, 90 ft. CapacityModel No. A-10Catalog No. 59210$60.95 Price $82.80Log in for member pricingIn stock: 1This item ships FREE -
RIDGID A-12 (59225) 1/2 in. Cable Pin Key for Drain Cleaning Cables and ToolsModel No. A-12Catalog No. 59225$4.45 Price $5.05Log in for member pricingIn stock: 4 -
RIDGID A-13 (59230) 3/8 in. Cable Pin Key for Drain Cleaning Cables and ToolsModel No. A-13Catalog No. 59230$4.40 Price $5.00Log in for member pricingIn stock: 5 -
RIDGID A-2 (59295) Right-Hand Drain Cleaning MittModel No. A-2Catalog No. 59295$27.95 Price $38.70Log in for member pricingIn stock: 2 -
RIDGID A-30 (59365) C-8 5/8 in. Cable Kit for K-50 and K-60SP Sectional MachinesModel No. A-30Catalog No. 59365$343.95 Price $474.30Log in for member pricingThis item ships FREE -
RIDGID A-8 (59470) Cable Carrier, 60 ft. CapacityModel No. A-8Catalog No. 59470$71.95 Price $88.95Log in for member pricingIn stock: 2This item ships FREE -
RIDGID A-61 (61625) Tool Kit for K-60SP Sectional MachinesModel No. A-61Catalog No. 61625$178.95 Price $227.00Log in for member pricingIn stock: 4This item ships FREE -
RIDGID A-62 (61630) C-10 7/8 in. Cable Kit for K-60SP, K-1500, and K-1500SP Sectional MachinesModel No. A-62Catalog No. 61630$389.95 Price $479.70Log in for member pricingIn stock: 1This item ships FREE -
RIDGID T-101 (62850) Straight Auger for K-60SP and K-3800 Drain Cleaning MachinesModel No. T-101Catalog No. 62850$25.95 Price $34.95Log in for member pricingIn stock: 1 -
RIDGID T-102 (62855) Funnel Auger for K-60SP and K-3800 Drain Cleaning MachinesModel No. T-102Catalog No. 62855$24.95 Price $34.95Log in for member pricingIn stock: 4 -
RIDGID T-103 (62860) 2 1/2 in. Sawtooth Cutter for K-60SP Sectional MachineModel No. T-103Catalog No. 62860$56.95 Price $81.65Log in for member pricingIn stock: 2This item ships FREE -
RIDGID T-104 (62865) 2 1/2 in. "H" Cutter for K-60SP and K-3800 Drain Cleaning MachinesModel No. T-104Catalog No. 62865$41.95 Price $59.45Log in for member pricingIn stock: 1This item ships FREE -
RIDGID T-105 (62870) 2 1/2 in. Grease Cutter for K-60SP and K-3800 Drain Cleaning MachinesModel No. T-105Catalog No. 62870$29.95 Price $43.25Log in for member pricingIn stock: 2 -
RIDGID T-106 (62875) 3 1/2 in. Grease Cutter for K-60SP and K-3800 Drain Cleaning MachinesModel No. T-106Catalog No. 62875$31.95 Price $46.40Log in for member pricingIn stock: 1 -
RIDGID T-107 (62880) 1 3/4 in. Spade Cutter for K-60SP and K-3800 Drain Cleaning MachinesModel No. T-107Catalog No. 62880$24.53 Price $32.35Log in for member pricingIn stock: 1 -
RIDGID T-109 (62915) 1 1/2 in. Spiral Sawtooth Cutter for K-60SP Sectional MachineModel No. T-109Catalog No. 62915$26.95 Price $34.95Log in for member pricing -
RIDGID T-110 (62920) 2 1/4 in. Spiral Sawtooth Cutter for K-60SP Sectional MachineModel No. T-110Catalog No. 62920$30.95 Price $39.20Log in for member pricingIn stock: 2 -
RIDGID T-111 (62925) 3 in. Spiral Sawtooth Cutter for K-60SP Sectional MachineModel No. T-111Catalog No. 62925$39.95 Price $57.10Log in for member pricingIn stock: 2This item ships FREE -
RIDGID T-112 (62930) 1 3/4 in. 4-Blade Sawtooth Cutter for K-60SP and K-3800 Drain Cleaning MachinesModel No. T-112Catalog No. 62930$36.95 Price $52.20Log in for member pricingThis item ships FREE -
RIDGID T-113 (62935) 3 in. 4-Blade Sawtooth Cutter for K-60SP and K-3800 Drain Cleaning MachinesModel No. T-113Catalog No. 62935$41.95 Price $59.45Log in for member pricingIn stock: 3This item ships FREE
