Ridgid K-60SP 230V w/A61/A62/A30
Sectional Drain Cleaning Machine for 1 1/4 in. to 4 in. Drain Lines, with A-61 Tool Kit, A-62 Cable Kit, A-30 Cable Kit, A-60-15 Rear Guide Hose, 115V
Ridgid K-60SP 230V w/A61/A62/A30
Sectional Drain Cleaning Machine for 1 1/4 in. to 4 in. Drain Lines, with A-61 Tool Kit, A-62 Cable Kit, A-30 Cable Kit, A-60-15 Rear Guide Hose, 115V
The RIDGID K-60SP 230V w/A61/A62/A30 is a Sectional Drain Cleaning Machine with A-62 and A-30 Cable Kits, Tool Kit and Rear Guide Hose. Driven by a 1/2 HP motor, it has an integral GFCI and toggle switch for FOR/OFF/REVERSE control. The cable is manually fed and rotates at a speed of 600 RPM. The clutch handle controls cable rotation. An adjustment knob allows both 5/8" and 7/8" sectional cable.
- Designed for cleaning 1 1/4" to 4" drain lines
- Designed for cleaning 1 1/4" to 4" drain lines
- Suitable for institutional, commercial or residential cleaning
- Ideal for septic tank vacuum truck operators
- Excellent for rooftop vent stacks: rear handle allows for easy transporting up ladders and onto rooftops
- Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages
- Remove only two bolts to access belt drive or jaw set for cleaning or replacement
- Simple adjustment knob allows unit to spin both 7/8" and 5/8" diameter cable:
- 7/8" cable (C-10) cleans 2" to 4" lines through 150 feet
- 5/8" cable (C-7, C-8, C-9) cleans 1 1/4" to 4" lines through 125 feet
- Unique, easy-to-use, instant-acting cable clutch maximizes operator control:
- Pull handle down and cable spins at 600 RPM
- Release handle, cable stops instantly
- Equipped with 1/2 HP motor
- Voltage: 230V
The RIDGID K-60SP 230V w/A61/A62/A30 (66477) Sectional Drain Cleaning Machine for 1 1/4" to 4" Drain Lines, with A-62 and A-30 Cable Kits, Tool Kit, and Rear Guide Hose is a portable drain cleaning machine designed to clean 1 1/4" to 4" drain lines. Applications include laundry tubs, floor drains, roof vents and stack lines. The rear handle allows for transporting up ladders and cleaning roof-top vent stacks.
The K-60SP machine is driven by a 1/2 HP motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle switch provides FOR/OFF/REVERSE control of the motor.
The K-60SP is designed to use sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 600 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. An adjustment knob allows the K-60SP to use both 5/8" and 7/8" sectional cable.
Country of Origin | United States |
---|---|
Brand | Ridgid |
Catalog | 66477 |
Condition | NEW |
UPC | 095691664778 |
Vendor Alias | 66477 |
- 1 - 115V Sectional Drain Cleaning Machine
- 1 - A-60-12 Rear Guide Hose
- 1 - A-12 Pin Key
- 1 - Drain Cleaning Mitt
- 1 - A-61 Tool Kit:
- 1 - T-101 Straight Auger
- 1 - T-102 Funnel Auger
- 1 - T-107 Spade Cutter
- 1 - T-125 Retrieving Auger
- 1 - T-150-1 Sharktooth Cutter
- 1 - A-3 Tool Box
- 1 - A-62 Cable Kit:
- 1 - Five Sections of C-10 Cable, 7/8" x 15 ft. each (75 ft. total)
- 1 - A-8 Cable Carrier
- 1 - A-30 Cable Kit:
- 1 - Six Sections of C-8 Cable, 5/8 in. x 7 1/2 ft. (45 ft. total)
- 1 - A-10 Cable Carrier
- 1 - T-201 Straight Auger
- 1 - T-202 Bulb Auger
- 1 - T-205 "C" Cutter
- 1 - T-211 Spade Cutter
- 1 - A-13 Coupling Pin Key
- 1 - A-14-6 Rear Guide Hose
- 1 - A-1 Left-Hand Drain Cleaning Mitt