Ridgid K-7500 3/4
Auto-Feed Drum Machine for 3 in. to 10 in. Drain and Sewer Lines, with 3/4 in. Pigtail and Tool Set, 115V
Ridgid K-7500 3/4
Auto-Feed Drum Machine for 3 in. to 10 in. Drain and Sewer Lines, with 3/4 in. Pigtail and Tool Set, 115V
The RIDGID K-7500 is an Auto-Feed Drum Machine with 3/4" Pigtail and Tool Set (115V). When the cable hits the blockage, the motor gears down automatically. The inner drum prevents cable flip over. It has an integral Ground Fault Interrupter (GFCI), "kickstand" base, and pneumatic foot actuator for ON/OFF control. The cable is fed in an out of the drain by an AUTOFEED assembly.
- Designed for cleaning 3" to 10" drain lines up to 250'
- Designed for cleaning 3 in. to 10 in. drain lines up to 250 feet long
- Suitable for professional use and ideal for any tough job, including roots
- 5/8" cable (not included) recommended for 3 in. to 6 in. drain lines up to 250 ft.
- 3/4" cable (not included) recommended for 4 in. to 10 in. drain lines up to 250 ft.
- Powerful 600-watt universal motor and gearbox bear down as cutter engages tough obstructions
- Inner drum and ball bearing distributor arm work together to guard again cable flip over
- Auto-feed trigger advances and retrieves cable with push of a lever, up to 22 ft. per minute
- Grease fittings and open design allow for easy maintenance of auto-feed trigger
- Main and inner drums are easy to clean and won't rust, split or dent
- Two-position stair climber eases transport and loading
- Narrow profile allows machine to fit through bathroom doors
- Handles adjust to desired height to ensure balanced transport
- Cable spins at 200 RPM
- Approved by CSA to CSA and UL Standards
- Drum Capacity: 100 ft. of 3/4 in. cable or 125 ft. of 5/8 in. cable
- Voltage: 115V
The RIDGID K-7500 (59562) Auto-Feed Drum Machine for 3 in. to 10 in. Drain and Sewer Lines, with 3/4 in. Pigtail and Tool Set (115V) will clean drain lines 4" to 10" in diameter and up to 250 feet in length. The 4/10 HP universal motor spins 5/8" and 3/4" cable at 200 RPM (cable sold separately). When the cable hits the blockage, the motor gears down automatically to deliver greater power and enhance operator control.
The molded polyethylene drum includes an inner drum that guards against cable flip over. An integral Ground Fault Interrupter (GFCI) is built into the line cord, while a "kickstand" base is provided for machine stability during operation. A pneumatic foot actuator provides ON/OFF control of the motor.
The drum powers a 5/8" or 3/4" cable that has a quick change coupling system for connecting or disconnecting tools. The cable is fed in an out of the drain by an AUTOFEED assembly at a rate of 0 to 28 feet per minute.
Country of Origin | United States |
---|---|
Brand | Ridgid |
Catalog | 59562 |
Condition | NEW |
UPC | 095691595621 |
Vendor Alias | 59562 |
- 1 - 115V Drum Machine with Auto-Feed Control
- 1 - 3/4 in. Pigtail
- 1 - T-406 Spade Cutter
- 1 - T-407 Retrieving Auger
- 1 - T-411 2" Double Cutter
- 1 - T-413 3" Double Cutter
- 1 - T-408 Sawtooth Cutter
- 1 - T-403 3" P-Trap Cutter
- 1 - T-468 3/4" x 2' Flexible Leader
- 1 - T-414B 4" Double Cutter (Blade only)
- 1 - T-416B 6" Double Cutter (Blade only)
- 1 - Tool Box
- 1 - 3/16" Hex Key
- 1 - Pair of PVC Drain Cleaning Gloves