Ridgid RE 600 4PI
Electrical Crimp Tool with Dieless Crimp Head, #8AWG to 750 kcmil
57663
RE 600 4PI
Ridgid RE 600 4PI
Electrical Crimp Tool with Dieless Crimp Head, #8AWG to 750 kcmil
57663
RE 600 4PI
The RIDGID RE 600 4PI is an Electrical Crimp Tool with Dieless Crimp Head. The dieless design eliminates the need for crimping dies or tool adjustments between crimps. The crimp head rotates 360° with one-handed operation. It has 2 fabric loops and a bright work light.
- Classified to UL 1976 for copper connectors and wire from #8AWG to 750 kcmil (MCM) and aluminum connectors and wire from #8AWG to 500 kcmil (MCM)
- Supplied with 2 batteries, charger and case
- Single-function tool equipped with non-interchangeable crimping head
- Dieless design eliminates the need to use crimping dies
- No tool adjustments required between crimps when working with different sizes of lugs
- Classified to UL 1976 for copper connectors and wire from #8AWG to 750 kcmil (MCM) and aluminum connectors and wire from #8AWG to 500 kcmil (MCM)
- Inline design for easy, one-handed operation even in tight spots
- Optimized for size, weight and balance to ensure stability
- 360° head rotation increases accessibility in difficult to maneuver spaces
- Bright white LED light directly illuminates workspace
- Industry-leading service interval maximizes uptime on the job site
- Rubber overmolded grips for superior comfort and control
- Nylon straps allow easy tethering or hoisting
- Supplied with two batteries, charger and carrying case
Specifications:
- 6-ton hydraulic force output
- Approximate Cycle Time: 5 seconds
- Service Interval: 32,000 cycles
- Temperature limit: 15°F - 122°F (10°C - 50°C)
- Power: 18V Advanced Lithium Battery platform
The RIDGID RE 600 4PI (57663) Electrical Crimp Tool with Dieless Crimp Head provides maximum efficiency when used for high-volume dedicated crimping applications. The dieless design eliminates the need to use crimping dies or make tool adjustments between crimps. The RE 600 is optimized for size, weight and balance to ensure stable performance. The crimp head can be rotated 360 degrees for better access in tight spaces, while the tool body features an inline design that allows for easy, one-handed operation.
When the RE 600 is operated, an internal electric motor powers its hydraulic pump, which supplies fluid to the cylinder of the tool, moving the ram forward and applying a 6-ton force to the specially designed tool head.
The RE 600 is equipped with two fabric loops that can be used with various attachments, such as shoulder straps or tie off lanyards. The RE 600 also features a bright work light that turns on when the run switch is depressed, allowing users to easily illuminate work areas.
| Country of Origin | Switzerland |
|---|---|
| Brand | Ridgid |
| Condition | NEW |
- 1 - RE 600 4PI Crimp Tool (57663)
- 2 - Batteries
- 1 - Charger
- 1 - Carrying Case
