Sauermann CPE310-S
Flush-Mount Multi-Function Differential Pressure Transmitter with Adjustment Certificate, -100 to 100 Pa
CPE310S
CPE310-S
24439
Sauermann CPE310-S
Flush-Mount Multi-Function Differential Pressure Transmitter with Adjustment Certificate, -100 to 100 Pa
CPE310S
CPE310-S
24439
The Sauermann CPE310-S Flush-Mount Multi-Function Differential Pressure Transmitter measures temperature, humidity, air velocity, CO, or CO2 and can display up to three parameters alternatively. The front-facing keypad allows the user to configure the transmitter and acknowledge the alarm while the configurable measuring ranges offers greater control.
- Measuring Range: -100 to 100 Pa
- 3 Analog Outputs: 0-5/10V, 0/4-20 mA
- Accuracy: ±0.2% of reading ±0.8 Pa
- Measuring Range: -100 to 100 Pa
- Front face differential pressure calibration
- Alternating display of 1 to 3 parameters
- Configurable measuring ranges
- Front face keypad allowing to configure transmitter plus acknowledge alarm
- 3 analogue outputs 0-5/10 V, 0/4-20 mA
- Front face made of brushed stainless steel with electroluminescent display
- Accuracy: ±0.2% of reading ±0.8 Pa
- Resolution: 1 Pa, 0.1 mmH2O, 0.01 mbar, 0.01 inWG, 0.01 mmHG, 0.1 daPa, 0.01 hPa
- Auto-Calibration: Manual/Automatic (configurable)
- Allowed Overpressure: 25,000 Pa
- Response Time: 1/e (63 %) 0.3 s
- Type of Fluid: Air/Neutral Gases
- Power Supply: 24 VAC / VDC ±10%
- Output: 3 x 0/4-20 mA, 3 x 0-5/10 V (4 wires), Common mode voltage, Maximum load: 500 Ohms (0/4-20 mA), Minimum load: 1 K Ohms (0-5/10 V)
- Consumption: 5 VA
- Conformity: 2014/30/EU EMC; 2014/35/EU Low Voltage; RoHS 2011/65/EU (EU)2015/863; 2012/19/EU WEEE
- Electrical Connection: Screw terminal block for cables from 0.05 to 1.5 mm2, from 30 to 16 AWG, Carried out according to code of good practice
- Visual Alarm: Blinking of value
- Audible Alarm: Buzzer (70 dB at 10 cm)
- Environment/Type of Fluid: Air/Neutral Gases
- Conditions of use (°C/%RH/m): From -10°C to +50°C, In non-condensing condition, From 0 to 2000 m
- Storage Temperature: From -10°C to +70°C
- Front Face of Housing: Brushed stainless steel 316 L
- Back Housing: Flush-mount in stainless steel 304 L
- Protection: IP65 in front face
- Display: Electroluminescent alphanumeric (38 x 48 mm), Protection screen made of inactinic red PMMA
- Back Fittings: Barbed fitting Ø5.2 mm
- Weight: 640 g
The Sauermann CPE310-S is a Flush-Mount Multi-Function Differential Pressure Transmitter that can display up to three parameters alternatively. This tool features a measuring range of -100 to 100 Pa. Users are provided with a tool that measures temperature, humidity, air velocity, CO, and CO2. Users are able to have greater control over this tool with configurable measuring ranges. The front face is made of stainless steel with an electroluminescent display. The CPE310-S also features an IP65 rating on the front face for greater protection.
| Brand | Sauermann |
|---|---|
| Catalog | 24439 |
| Condition | NEW |
| Vendor Alias | CPE310-S |
- 1 - Flush-Mount Multi-Function Differential Pressure Transmitter
- 1 - Adjustment Certificate
